Optronics Trailer Lights AL42PB Review Video

The steel tubing #T1086600 has 3/8"-24 threads. This is pretty much standard and it should fit just fine on your trailer. On the off chance that it doesn't fittings to adapt one to the other are readily available at any auto parts store.

Thank you for the photo; and while we can tell you how to determine the correct replacement round, red tail light for your trailer, we don't have any way of knowing the exact light because unfortunately there isn't any type of list of…

When selecting an LED light, if the description states it is waterproof or submersible then the light can be submersed in water. The item you selected, Waterproof, Under 80 Inch LED Trailer Light Kit with 25 Foot Wiring Harness, part #TLL9RK, has…

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

We do have both red and amber round clearance lights with a flush-mounted base you can screw in. The 2-1/2" Optronics #MC58AB is an amber light while the #MC58RB is red; you only need to remove the lens to access the white mounting base, screw…

Two-wire LED clearance lights such as the Red #MCL32RB or the Amber #MCL44AB have one wire for the power lead and one ground wire. The wire that was attached to your old clearance lights will be spliced to the power wire of your new lights. The black…

The marker and clearance lights you have now ground with a single wire hence why you have two wires total, one for power and one for ground. If the marker or clearance light only has one wire then this wire is for power and the light grounds though…

Normally the SAE number isn't a reliable way to pick out replacement lenses, but we know that the #A32RB is the correct replacement for a lens marked SAE-A-P2-DOT-02 like what you have. For an all new assembly you'd want the part #MC32RB.

I do see many of the 2009 Ranger Trail trailers allow you to use a replacement Inner Member. You will need to match these with your specific actuator and either Disc #DX99FR or Drum #DX97FR brakes. If you can tell me exactly what model number…

I checked with the manufacturer, and the max capacity is 2,200 lbs and psi is 75 for the Aluminum Sendel Series T07 Black Machined Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 #AM25DR. That said, I'm not aware of any 14 inch load range…

We do not have a way to balance and mount wheels, like the Aluminum Sendel Series T07 Black Machined Trailer Wheel - 14" x 5-1/2" Rim - 5 on 4-1/2 #AM25DR, and tires before shipping. You would have to take them to a local tire shop. They do…

The best wheels for saltwater are going to be aluminum wheels because they do not rust. I would not recommend using a steel wheel like the #AM20315 you were looking at. It might hold up if you meticulously rinsed it with fresh water and made sure to…