Review of MORryde Trailer Leaf Spring Suspension - Triple Axle Rubber Equalizers - MR59ZR Video

Your 2019 Heartland Cyclone model 4270 5th wheel is going to need the 35" Equalizers #MR39ZR like you found. You can verify this if you like by measuring from the center of the center wheel to the center of the front and rear axles. You will…

The MORryde X-Factor Crossmember part #MR33WR attaches to the leaf spring hangers which are located in-between and in the front and rear of each axle. I have attached a photo below to clarify. Therefore, you'll need three for full support on a…

You can use that upper hole on your hanger to install the #MR33WR. Make sure you don't tighten it down too much or you will pinch the leaf spring and it won't function properly. You will also need to make sure you have enough room to install…

Thank you for the images. The MORryde Rubber Equalizers #MR87ZR are the correct set for your 2020 Keystone Outback Ultra-Lite 291UBH. You will pair this with the MORryde Suspension Upgrade Kit #MR46ZR. Instead of using the wet bolts included with the…

The MORryde X-Factor Crossmember part #MR33WR is designed for standard suspension so that is the one you will need to use. If your leaf spring hanger brackets are wider than 3" then you will need to drill per the instructions which I have…

It is likely you can avoid the drain line when installing the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR by using the MORryde X-Factor Crossmember Adapter Kit for Drop Down Applications #MR43WR. I don't know exactly the…

Thanks for the pictures and info on the EZ Flex equalizers of your 2014 Heartland Cyclone 4100. Based on that the correct replacement kit is the part #K71-656-00 that you referenced as this is the exact replacement.

The Keystone Carbon 417 should have a 35" axle spread which can be confirmed by measuring from the center of each axle. In which case, we have options from both Dexter and MORryde. The MORryde Rubber Equalizers for Triple Axle Trailers part…

Absolutely, the Dexter leaf spring part 072-098-00 is a double eye spring, designed for 7,000 lb axles, with a 25-1/4" eye to eye measurement. The closest leaf spring we have to that is the Double-Eye Spring part #SP-198275 which is a double eye…

As the Dexter #K71-657-00 is rated for 35 inches of axle spacing, I do not suggest using it. However, we do have a MORryde system that will work with your spacing. The MORryde Shock Absorbing Suspension Equalizers for Triple Axle Trailers w/ 33"…

The suspension in general on your trailer looks very worn. I would replace as much as I could on it to get it back to good working order. The problem with the equalizer cocked to one side like that can happen sometimes. It usually fixes itself when a…

The MorRyde part number that is the same as the U021-003 is our part #MR33WR actually.