Review of Lippert Components Manual Crank Awning To Power Conversion Kit - LC337727 Video

If you are referring to the head pin then yes we do have this available as the Replacement Head Pin for Solera Power Awning Gear Drive Head part #LC266141. That said, you would also want two Replacement Retaining Clips part #LC266137 and one…

The pin you need for your Solera Power Awning Drive Head is part #LC266141. The Replacement Drive Head Gear Kit #LC353964 does not include the pin so you need to use the part I mentioned above. Please note that when I reached out to my contact at…

We do have both the parts you are looking for, the replacement head pin, as well as the end cap, and the end cap is available in both white and black so you can choose the correct color. What you need are the following: - Replacement Head Pin for…

The Solera awning components like the Solera Manual Pull Style to Power Awning Conversion Kit #LC329250 that you referenced are designed to fit the standard brackets etc. found on campers. You would be able to easily reuse the same hardware on your…

You can use this #LC329250 conversion kit if you have a pull style manual awning. These Solera Kits are compatible with your Dometic awnings and everything you need is included with the kit. I've provided a video for you to check out!

Good question, and while the Solera 12V Power RV Awning Conversion Kit doesn't work for every Dometic awning, I double checked with the manufacturer for you, and it does indeed work with your Dometic 8500 Series awning. It will work with the…

If your Dometic awning has a manual crank system then you'll want to use the #LC434724 and if your awning is a pull style awning then you'll want to use the #LC329250. So you'll just need to determine how your Dometic awning operates to…

The Solera Manual Pull Style to Power Awning Conversion Kit, White #LC329250 is a nice upgrade. I've attached some photos of the installation instructions for the parts exchange and the wiring of the unit.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…