Customers compare AM39053 to these similar products
Products Featured in this Video
Today we're going to review part number AM39053. This is the Kenda carrier, ST20575R15 radial trailer tire in load range D, mounted on this 15-inch silver seven spoke aluminum wheel with the 5 on 4-1/2-inch bolt pattern. Now this tire and wheel assembly is ideal for boat trailers, stock trailers, utility trailers, and even campers. The tire they use is a Kenda carrier radial tire. It does use the… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…
view full answer...The best option we are going to have that will give you the higher weight capacities on a nicer looking aluminum wheel is going to be for you to move to a 15 inch wheel and tire combo like the part #AM39053. This has the same 5 bolt pattern and a…
view full answer...Westlake trailer tires ST235/85R16 like the #LHWL410 that you have are great trailer tires. A lot of people don't care for non-American made tires, and we can appreciate that sentiment, but the Westlake tires do not have the reputation for being…
view full answer...Our selection of trailer tires in the 205/75-14 size with a D load range is limited to Kenda Karrie and Westlake. These both are considered higher quality radial options but the best one for your application will come down to your particular speed vs…
view full answer...The 84545 hub on your Stratos Trail Trailer uses the standard bearing combination for a 3,500 lb axle just like the #84545UC1-EZ and #84545BX. This means the correct bearing kit is the Hub Bearing Kit for Lippert, Dexter, and Al-Ko Axles - 3,500 lb…
view full answer...Different size and bolt pattern wheels that take the same tire size will have different psi ratings. If your existing wheels are rated for 65 psi then it is less likely that they would also be rated for 80 psi which is what an ST225/75-15 load range…
view full answer...A chrome finish ball #C40036 is going to look good but it will not be corrosion resistant. A ball with a machine finish like #C40087 , is going to have about the same corrosion resistance. In terms of performance they will wear at about the same rate…
view full answer...EZ Lube axles like the item #T3584F-EZ-8974 come from the factory with just a little bit of grease in the bearings. The first time you use the EZ Lube feature to fill the axle, it will take a lot of grease. You will probably use 3/4 to a full tube…
view full answer...I have attached a chart you can check out that describes the torque needed per wheel size, wheel stud size and material. For an 8-inch wheel with a 1/2-inch wheel stud the torque is 75 to 86 ft-lbs. For a 15 inch steel wheel with 1/2 inch wheel studs…
view full answer...The correct torque for installing lug nuts on your 5 X 8 trailer's 5-lug wheels will depend on the size of the lugs. For a 1/2-inch lug the torque spec ranges from 75- to 85-ft-lbs. For a 9/16-inch lug the torque spec ranges from 135- to…
view full answer...Although the Dexstar Steel Mini Mod Trailer Wheel #AM20315 has a e-coat primer and black powder coat finish, this is option is much more prone to rust over an aluminum or galvanized rim. The powder coat finish is mainly for common trailer use so it…
view full answer...The most common 5 bolt pattern is 5 on 4-1/2. However, 5 bolt patterns also come 5 on 4-3/4, 5 on 5, and 5 on 5-1/2. It is important to know the bolt pattern before you buy new wheels to ensure a proper fit. I have attached an article on how to…
view full answer...