Review of JR Products Hitch Pins and Clips - Standard Hitch Pin - 37201065 Video

The Dexter 2-Tang Clevis #T1807800 has mounting holes that will line up with the BulletProof Hitches 2-Ball Mount for 2-1/2" Hitches #MD254, but the Clevis uses 3/4" pins while the BulletProof shank uses 5/8" pins for the ball mount.…

The Timbren #TDR3500CA Aeon springs are a fit for your truck. According to Timbren, there was a manufacturing run that had weld spatter on the threads, but this was an isolated incident that occurred some time ago. The problem has been taken care of…

For your 2019 Ram 3500 single rear wheel the correct fitting Timbren kit is part #TDR3500CA that you referenced. Timbren has confirmed for us that this does fit your truck. It fits a few years of the Ram trucks which might be why you've seen…

For your 2003 Chevy Silverado BullRing has the BullRing Retractable Tie-Down Anchors for Truck Bed Stake Pockets - Raised Fit - 1,000lbs - Qty 4 #BU85FR or the #BU25FR for a quantity of 6. For your 2019 Ram Bullring has a stainless steel flush-fit…

The Replacement Crank Handle for etrailer and Ram 5th Wheel Landing Gear #RVLG-HDL measures 31" long, including the handle on the end. The crank assembly itself measures 27" not including the handle on the end. I attached a photo diagram…

The retracted height of this product #BD0287600300 is 29-1/2", the ball hole is 2-5/16", and has a range of adjustment of 8".

I've linked our selection of weight distribution shanks for 2-1/2 inch hitch receivers. Most shanks are universal and will work with other brands of systems. As long as the holes are 3/4 inch in diameter and are spaced 1-1/4 inches apart…

It is perfectly safe to use a reducer sleeve like the Curt #C45405 to fit an accessory with a 2" shank into your 2-1/2" trailer hitch receiver. We do have options for you to use a ball mount with a 2-1/2" shank for when you want to tow…

Yes the Equal-i-zer weight distribution shank part #EQ90-02-4900 is essentially the exact same shank as the 90-02-4325 you mentioned with exact same dimensions and capacities.

The Peterson Magnetic Tow Lights - 4-Way Flat Connectors #PE26UR have a strong magnet. They don't have any weight rating or capacity rating. They have been tested at highway speeds with various weather conditions to stay firmly in place on your…

You can have a 2-5/16 inch hitch ball on either a 1 inch or 1-1/4 inch shank. The nut on a hitch ball with a 1-1/4 inch shank takes a wrench with a 1-7/8 inch socket. A hitch ball with a 1 inch shank will take a wrench with a 1-1/2 inch socket. You…

We don't have a combo of the Curt Hitch Ball #C40008 and Curt Ball Mount #C45340. The ball mount is extremely heavy-duty, rated up to 17,000 pounds. I think it's safe to assume you don't have a torque wrench rated up to 450 foot pounds…