Review of Curt Trailer Hitch Ball - Smooth Ride Trailer Ball - C82KR Video

Without knowing the model number it simply is not possible to tell you with absolute certainty what size receiver you have, but the largest receiver size for aftermarket hitches for a 2013 Chevy Silverado 2500 or 3500 is 2-1/2 inches, such as what is…

I was able to get a dimension sheet from my contact at Curt for the Curt Hitch part #C15800 that you referenced. See attached pic. I also attached a set of the installation instructions for this hitch.

I reached out to my contact at Curt and it is possible that the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" #C15860 will fit your 2016 GM Sierra 2500 with a Service Body as long as it did not start life as a cab…

Both of the Curt hitch receivers have the same bolt hole measurements. It's 9 inches from the first hole (Closest to the front of the truck) to the second hole and 5-1/2 inches from the second to the third. There's 39 inches across from hole…

I have a solution for achieving the height of the 2-5/16" Hitch Ball w/ 2" Rise - 1-1/4" Diameter x 2-5/8" Long Shank - Raw - 25K item #C40087 you were looking at but there aren't any high rise 2-5/16" hitch balls with a…

The height of the Curt RockerBall from the base that sits upon the ball mount to the top of the ball is as follows: - 2-5/16 inch ball with 1 inch diameter shank, #C82KR is 4.607 inches - 2-5/16 inch ball with 1-1/4 inch diameter shank, #C29FR is…

The Curt RockerBalls like the part #C40047 do not require the use of a Curt ball mount or trailer hitch. They can be used in essentially any brand of ball mount or hitch.

I can definitely see why you might think that, but an anti-rattle device is not going to compromise the shock absorption of the Convert-A-Ball Ball Mount for 2" Hitches #AMSC2. The polyurethane interior of the ball mount will continue to be…

The Curt RockerBall Shock Absorbing part #C40047 only comes in a 2" ball at this time. You may consider using a ball mount like part #AMSC2HD that has a shock absorbing core with a 2-5/16" ball. The ball hole diameter is 1-1/4". If you…

There is not a replacement ball mount available for the Convert-A-Ball Adjustable Cushioned Ball Mount, CAB-UM, but there is what I believe is a better solution to your dilemma. The Convert-A-Ball Interchangeable Ball Set, item #906B, would give you…

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

The cushion inside of the Convert-A-Ball cushioned ball mount #AMSC4 would have only a slight affect on the surge coupler on your trailer. You may not even notice it. The cushion is very dense and the more pressure that is put on it the firmer it…