Review of Curt Fifth Wheel Hitch Parts - Replacement Operating Handle - C55UR Video

The Reese Replacement Head Kit #58292 is the correct head assembly for 18K and 20K Select Plus 5th wheel hitches with original part 117300. We also offer the matching Head Support #58293.

If the bolt holes for the hitch you currently have that attach the head to the slider are 1/2 inch diameter, the replacement 20,000 lb head you can use with your slider legs is part #30118. I have attached a photo that shows the bolt holes I…

If you are trying to remove the head from the center section on the Curt Q20 5th Wheel Trailer Hitch w/ R20 Slider part #C16530-16020 then you will need to remove a pin, clip and cap from each side as you can see in the attached photo. If you have…

For a Draw Tite 16k fifth wheel handle kit you would wan the part #58161.

The replacement handle for the Reese Kwik Slider is the part #58161.

Yes, we have the replacement arm for the slider unit on your Reese 5th Wheel Trailer Hitch, #RP30051. You will need the Draw-Tite / Reese Kwik Slide Replacement Handle, #58161, to replace your bent handle.

Using a lube plate like the part #16721 would be a great idea with your Curt Q20 fifth wheel hitch part #C16130. The hitches comes with this lube plate but if you were ever in need of replacing it this would be the part number.

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…