How to Determine if Brophy Clamp On Camper Tie-Downs HSAB Will Fit a 2016 Nissan Titan XD

Question

Question:

Would like to know if it would fit the 2016 Nissan titan xd?

asked by: Kevin P

0

Expert Reply:

Brophy does not have a fit list for tie-downs # HSAB so you have to go by how they install. The external bed rail width cannot be more than 5-1/2 inches wide. There will need to be at least 2 inches space under the lip of the bed rail. And they are not compatible with double-wall or step-side beds (this last one I do not believe would apply your 2016 Nissan Titan XD).

Another option is custom tie-downs, see link.

expert reply by: Michael H

0

Answer 1

At this time we only offer the Brophy Camper Tie Downs part #HSAB sold in a quantity of 4.

view full answer...

Answer 2

For your 2020 Chevy Silverado 2500 with 6-3/4 foot bed, the front #TLC2225 and rear tie down #TLC3221 are the correct fit for your truck. Whether you have the double cab or the crew cab and whether you have running boards or not these are the…

view full answer...

Answer 3

There are several camper tie downs that you could use depending on how you want them to mount. First, the Camper Tie Downs, #TDSF, that you have referenced will fit your truck and fit in the truck stake pockets. If you do not want something in the…

view full answer...

Answer 4

Yes, the Brophy Clamp On Camper Tie-Downs #HSSF will fit on your 2021 Nissan Titan XD as long as your external bed rails do not exceed 5-1/2", you don't have a drop in bed liner, plastic bed rails, double-walled beds, or side-step…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 6

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory…

view full answer...

Answer 7

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

You are correct the HappiJac Camper Tie-Downs #LC182904-182971 are the correct kit for your 2013 GMC Sierra 3500 with a regular cab and 8' bed. I would highly recommend looking at the Torklift Front #TLC2215 and Rear #TLC3212 as a better option…

view full answer...

Answer 11

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

view full answer...

Answer 12

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

How to Determine if Brophy Clamp On Camper Tie-Downs HSAB Will Fit a 2016 Nissan Titan XD

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching