Review of Blue Ox Weight Distribution Hitch - 10K WD for Underslung Trailers - BXW1003 Video

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. Measuring is not required if you just take a look at your coupler and see where it attaches to…

On the Blue Ox Weight Distribution System item #BLU66FR the 29" inch measurement point is the center of the bracket. There is some margin for the placement of the bracket because of the chains holding the torsion bars. However, there has to be…

As long as your Gross Trailer Weight does not exceed the max capacity of 10,000 lbs, and as long as the Tongue Weight of your trailer plus the weight of any cargo behind the rear axle of your tow vehicle is between 750-1,000 lbs, the Blue Ox #BXW1003…

Since you have an aluminum trailer I suggest using a tie-down that has a backing plate like #RR5K. This will help reinforce the tie-down since aluminum may not hold up. It would be even better if you can install the tie-downs to the frame of the…

I checked with Blue Ox and you will want to torque the 3/4" bolts on the Blue Ox SwayPro item #BXW1000 to 257 ft/lbs.

For your R-pod travel trailer, the biggest issue you will face is sway , so I recommend he Strait-Line Weight Distribution System w Sway Control - Round Bar - 10,000 lbs GTW, 600 lbs TW #RP66086 which is rated for total tongue weight between 200 and…

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

A Timbren Rear Suspension Enhancement System such as #TFR1504D which fits your 2013 Ford F-150, does not take the place of a weight distribution system. The Timbren systems will help reduce body roll and absorb shock but will not transfer the load of…

When you say Blue Ox 1,000 lb bars, I believe you are referring to the Blue Ox SwayPro Weight Distribution w/ Sway Control part #BXW1003 system which has bars rated between 750 lbs-1,000 lbs trailer tongue weight. It doesn't make much of a…

So long as your Airstream trailer has an A-frame, then yes, you can use the A-Frame Trailer Coupler - Underslung #CA-5335-B. There is no way for us to know what couplers fit any specific trailer, but so long as you have an A-frame then there…

With weight distribution systems you can't really make tight turns while backing up. What we recommend is that if you are basically backing up in a straight line you can leave the spring bars on the system. But if you think you will end up…

The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…