Review of B and W Trailer Hitch Ball Mount - Tow And Stow 3 Ball Mount 2-1/2 Inch Hitch - BWTS20048B Video

The answer to your question will depend on the trailer hitch receiver on your truck. From what I have found, the Rock Tamer mud flaps require minimum 1" of space in order to be able to mount them. I reached out to B&W and the distance from…

The 7" Drop/7.5" Rise of the B&W Tow & Stow 3-Ball Mount won't be too much for your 2016 Ford F-250, and since you value versatility, it will actually be a really useful option. When we installed this exact ball mount on a 2020…

Hitch pins don't actually bear any of the weight of the trailer so they are not rated for trailer weight like what you are referencing. The tongue weight of the trailer pushes so hard down on the hitch tube that it binds it up in the hitch…

In order to choose the correct B&W Tow & Stow 3-Ball Mount you'll need to measure the distance from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler…

Yes, for the B&W Tow & Stow, I recommend the Trailer Hitch Receiver Lock for 2", 2-1/2", and 3" Hitches #C23025.

The B&W Tow & Stow 2-Ball Mount #BWTS20040B is a Class IV adjustable ball mount that will work in a 2-1/2-inch hitch with either a Class IV or a Class V rating. The weight ratings differ for the two included hitch balls; the 2-inch is rated…

The steel of the B&W Tow & Stow 3-Ball Mount #BWTS20048B is machined. If it were cast you would see the casting flaws that are normally associated with cast metal.

Yes, for a front hitch for your 2024 GMC Sierra 2500 we have the Curt #C52NR. It features a bolt-on installation and comes with a limited lifetime warranty. This hitch has a line pull of 9,000 lbs, vertical load of 500 lbs, and gross trailer weight…

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20048B and measured a distance of right at 5-1/2 inches from the bottom of the shank to the lowest point of the vertical adjustment post. I have attached an…

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

The Curt Front Mount Trailer Hitch Receiver #C52NR will fit your 2024 GMC Sierra 2500 AT4 but you will need to trim the rock guard in order for the hitch to fit.

The B&W Tow & Stow 3-Ball Mount #BWTS20049B referenced in your question has a maximum drop or rise of 7-1/2 inches. It features incremental height adjustments between those two maximums. This is a really nice ball mount with a stowable design…