How Much Does B&W Tow & Stow 3-Ball Mount # BWTS20049B Adjust

Question

Question:

How much does this adjust?

asked by: Keith

0

Expert Reply:

The B&W Tow & Stow 3-Ball Mount # BWTS20049B referenced in your question has a maximum drop or rise of 7-1/2 inches. It features incremental height adjustments between those two maximums.

This is a really nice ball mount with a stowable design that will let you store the ball and mounting platform beneath your vehicle. It includes a 1-7/8 inch, 2 inch, and 2-5/16 inch hitch ball. I have attached a short video demonstration on this product that you can also take a look at.

expert reply by: Chris R

0

Answer 1

In order to choose the correct B&W Tow & Stow 3-Ball Mount you'll need to measure the distance from the ground to the top inside edge of the trailer hitch and then subtract the distance from the ground to the bottom of the trailer coupler…

view full answer...

Answer 2

The answer to your question will depend on the trailer hitch receiver on your truck. From what I have found, the Rock Tamer mud flaps require minimum 1" of space in order to be able to mount them. I reached out to B&W and the distance from…

view full answer...

Answer 3

The B and W Tow & Stow 3-Ball Mount #BWTS20049B that you referenced would be a great choice for your situation. It fits the 2-1/2 inch hitch your 2019 Ford F-250 has, gives you all three popular hitch ball sizes, and can do a drop of up to 7…

view full answer...

Answer 4

The best option for larger trucks is without a doubt an adjustable ball mount that way you aren't stuck with a fixed ball mount that only works on certain trailers. The best option for this if you have the larger 2-1/2" receiver tube is the…

view full answer...

Answer 5

I went out to our warehouse to take a look at the B&W Tow & Stow 3-Ball Mount #BWTS20049B referenced in your question. I measured a total length of right at 11 inches of the vertical adjustment shank on the ball mount. I have attached a short…

view full answer...

Answer 6

I have a solution for you, but the small pin included in InfiniteRule Locking Pins for B & W Tow and Stow 10K and 14.5K Ball Mounts - Qty 4 #34061775-D is not long enough to work well with a 3" receiver. Instead, I recommend going with the…

view full answer...

Answer 7

The B&W Tow & Stow 3-Ball Mount #BWTS20049B that you referenced only fits the larger hitch size of 2-1/2 inches. What you would need is the 2 inch hitch version of this which is part #BWTS10049B.

view full answer...

Answer 8

Yes, the etrailer Trailer Hitch Receiver #e98905 uses 1/2-13 x 1 3/4 carriage bolts to fit the existing holes in the bumper beam on your 2022 Toyota Tacoma. I've attached a link to the instructions as well as a clip from the instructions to…

view full answer...

Answer 9

If you just wanted to replace the 3 pins on the B&W Tow & Stow ball mount like part #BWTS20049B , you'd use the part #IR57FR. If you also wanted a keyed alike receiver lock to secure the whole shebang into the hitch receiver, we offer a…

view full answer...

Answer 10

The B&W Tow & Stow Adjustable 3-Ball Mount #BWTS20049B has a 2-inch ball rated for 7500-lbs. You are right that standard individual 2-inch hitch balls can carry much higher ratings, such as Curt 2-inch ball #A-90 which is rated for 10K. All…

view full answer...

Answer 11

We have found that the part #AM3492 works as a lock for the ball mount platform portion of the B and W Tow and Stow ball mounts like the part #BWTS20049B that you referenced.

view full answer...

Answer 12

If you are on the last adjustment of your 5 inch drop B and W Stow and Go you would want to go with the part #BWTS20049B especially once you lift the truck. On as big of a truck as what you have you would not have any issues with dragging either. I…

view full answer...