Search: Universal Receiver Hitch   >   RV and Camper Hitch   >   Frame Mount Hitch  x   >  

To replace your GloBrite 126 marker lights you can use the #MC44RB. These lights are 2-wire incandescent lights measuring 4" long by 1-1/2" wide (same as your existing marker lights) and will work great for your trailer.

I have some measurements for you which will allow you to verify if the Replacement Amber Lens #A44AB will fit your 2023 Grand Design Imagine XLS 17MKE. This lens is 4" long by 1-1/2" tall, see image below. Unfortunately, only Grand…

I contacted Lippert and they are not able to tell which motor you need based off of the fifth wheel model however, I can tell you where to look for the serial number of the slide out. If the slide out is a through frame the arms may have a tag with…

I would be happy to help you with that. I went out to the warehouse and took some measurements of the Buyers Products Hitch Plate with Receiver Tube - Chevy/GMC item #3371809065. The distance between the two wings on the top outside edge of the hitch…

The #AT91367 will not work with your Atwood OD-5001 water heater. Like you mentioned, the replacement boards have been discontinued, so really the only option we can offer is a new water heater. I fully realize it's not what you are wanting to…

I wasn't able to find much about your Magnetek 6345 power converter but I was able to find out that it has a max 45 amp draw and is rated for AC/DC use which both match the Progressive Dynamics 4000 Series Inteli-Power Converter #PD4045KA. It is…

The Curt #C15803 you referenced is only a fit for 2014-2018 Ram trucks so that isn't the correct fit. Because you have a 34 inch frame, I recommend the Buyers Products Class 5 Service Body Hitch Receiver - 2-1/2" #3373018538 which measures…

For your Ford F-53 chassis I recommend taking a look at the Draw-Tite Multi-Fit Trailer Hitch #5350. This is an adjustable hitch specifically designed for applications like yours as it can fit frame widths that measure between 24 and 46 inches. It…

Yes, we do have those kits. The kit 6212 that you referenced is part #SM99666 on our site. The kit 6237 that you referenced is a combination of parts #SM99226 and #SM99625 on our site.

As we do not carry the Atwood jacks, I cannot confirm the fitment without knowing the measurements. However, the bolt holes on the HappiJac Swing Out Extension Brackets #LC182496 will measure 7-1/4" between all the bolt holes, picture included.…

The Dometic RV Water Heater - Gas - Automatic Pilot - 12 Volt - 8,800 Btu - 6 Gal Tank Item AT96121 is the direct replacement for the GC6AA-10E. Unfortunately it is out of stock with no expected restock date. Instead I recommend the Furrion RV…

It's possible the Lippert Spare Tire Winch with Offset Cable #LC159056 could attach to the studs you have under your RV frame but the studs would need to be 5-1/4 inch apart on center as this has mounting holes that are 5-1/4 inches apart. The…