Search: rv trailer hitch   >   RV and Camper Hitch   >   Frame Mount Hitch  x   >  

I have a solution for you that I can provide, but we aren't going to have a custom fit hitch to fit a vehicle like what you referenced. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service…

I do say those welds are bad and it appears the bumper is simply welded onto the back plate of the trailer rather than the frame. I recommend removing the entire bumper for the Mount-n-Lock Heavy-Haul'r Replacement RV Bumper #MNT43VR which…

Yes the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers part #AL88396 is compatible with the B&W Turnover Ball Gooseneck part #BWGNRK1111. The kit comes with two 3/4" bolts one longer one shorter the longer…

We have the Draw Tite front hitch part #65053 that fits your 2022 Ford E-450 Jayco motorhome.

I do have a solution for you, however we do not currently have a custom-fit trailer hitch that is confirmed to work with the Ford E450 chassis on your motorhome. I recommend looking at the Adjustable Width Trailer Hitch Receiver #13703. This is an…

I have a solution for you, but the two hitches you were looking at will not fit your Motorhome. While there is no custom fit hitch for your chassis, we do offer a few universal options. One type of motorhome hitch is the Draw-Tite #5350, which can…

The reason your brakes are locking up when you use the 7 Pole to 6 Pole Adapter, #47549, is because there are two ways that 6-way round trailer connectors can be wired, as you may have already discovered. The difference is the pin for the electric…

The problem that you are experiencing is likely happening because there are 2 different ways to wire a 6-Way trailer connector. The brake output pin will wither be the center pin or it will be in the 2 oclock position, if looking at the face of the…

For your 2008 Ford F-250 King Ranch with a B&W Turnoverball Gooseneck Hitch I recommend the Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle #AL57398 if your truck is 4WD or the #AL57397 if your truck is 2WD. Both of these options are…

Since it looks like you have C-channel on your 2021 Winnebago Micro Minnie FBS Comfort Explorer you'd have to find a welder to box the frame so that you can then install the Mount-n-Lock SafetyStruts #MO22FR that you referenced but it can fit.

The Lippert Tailgate Storage System Mounting Kit part #LC432336 is designed to be used with the Lippert Components Tailgate Storage System part LC404069 (Not Currently Available) or part #LC243621.

I spoke to Lippert about the Lippert Components Flip Down Slotted Rack Tailgate Storage System part #LC243621 and they do not list a specific number of bikes that can be used. The reason for this is that it can vary greatly based on what type of…