Hopkins Endurance Quick-Install 7-Way Trailer Connector Review Video

Check out the picture I attached, if what you have on your 2001 Dodge Durango looks like it will attach to that then the #20135 would work well on your vehicle.

Sounds like your Trooper has separate turn signals from the brake lights and what you are trying to do is wire up a trailer connector that is designed for combined circuits. This is a fairly common problem and the solution is to wire in a signal…

I have exactly what you need to install a 7-way trailer connector on your 2015 Jeep Wrangler Unlimited. It sounds like you have the factory tow package therefore, all you would need to do is remove the 4-way you have now and replace it with the…

To install the Tekonsha Prodigy P3 Trailer Brake Controller #90195 in your 2019 Jayco Seneca on the Freightliner S2RV chassis the wiring is behind the kick panel in the drivers compartment. There is not a connector on the wires, they are simply…

The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached…

You are not missing anything and you are correct. The Reese Weight Distribution Shank #RP69FR will provide 8.75" of drop. I have included a picture that shows the drop dimensions between each hole.

In order to install a Weight Distribution System, the distance from the center of the ball to the end of the bracket requires a minimum of 33 inches. In some cases, tongue modification or relocation of items such as LP tanks or Batteries, etc. may…

Weight distribution shanks are most of the time interchangeable between manufacturers, so if you need a specific drop or are simply looking for the best price you can use any shank that fits your trailer hitch receiver and meets the tongue weight…

I highly recommend the Reese Strait Line over the Blue Ox. Both systems are about the same degree of difficulty to install, but the Strait Line features the only sway control on the market that works to prevent sway before it starts. One of the…

Since the goal when picking out the correct rise/drop ball mount is to tow the trailer as level as possible you would want to compensate for sag like you mentioned. 3 inches of sag is quite a bit but you'd need to factor it in when towing if…

Yes, we have exactly what you need. To convert the 4-way of your Jeep to a 7-way so that it will adapt to your trailer that has a 7-way you have two options. If your trailer doesn't have brakes all you would need is the #37185. This would simply…

The only difference between 7-Way Utility and 7-Way RV is the color of the wires. The pin outs are the exact same so either would work just fine with the other. If you check out the picture I attached you'll see that the functions are all the…