Prodigy Brake Controller Wiring Adapter for 2007 Chevrolet Silverado Classic Body

Question

Question:

Do I still need the 3015-S adaptor to use a Tekonsha Prodigy with my 2007 Silverado Classic that has the trailering/towing package, and includes a Z82 wiring adaptor that plugs into the electrical box above the drivers left foot, and has 5 wires on it?

asked by: Paul M

0

Expert Reply:

Yes, if you already have the Prodigy brake controller and are simply wanting to move it to your 2007 Chevrolet Silverado, you will need to use the brake control wiring adapter # 3015-S.

This adapter would plug in where you indicated and will connect to the back of the brake controller.

expert reply by: Robert G

0

Answer 1

The Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Pigtail - GM #3015-S does match color for color if you have 12V power getting to the adapter. If you do not, then they specify that the red and black are reversed for functions in…

view full answer...

Answer 2

It sounds like you had a short on the electric brake controller wiring at some point, since the wires are black. This indicates the wiring was overheated. The first thing I would do is check the 7-Way connector on the trailer and the truck for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 7

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 8

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Prodigy Brake Controller Wiring Adapter for 2007 Chevrolet Silverado Classic Body

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching