Hitch Recommendation for a 2015 Audi A3

Question

Question:

will the C11399 fit 2015 Audi a3

asked by: Frank G

0

Expert Reply:

The correct hitch for your 2015 Audi A3 would be the Curt hitch part # C11399 that you referenced.

For trailer wiring you would want the part # C59496.

For a ball mount part # C45520, 1-7/8 inch ball # 19256, 2 inch hitch ball part # 19258.

expert reply by: Jameson C

0

Answer 1

I was able to find a fit for the 2016 Audi A3 Sportback, in a 1-1/4 hitch size. We offer the Curt #C11399, which is a class I hitch with a 1-1/4" receiver. When using the Curt hitch for non-trailer loads like a bike rack or cargo carrier you…

view full answer...

Answer 2

Yes you are correct that we only carry Class I hitches for this vehicle because Class II hitches are generally too heavy duty for towing with vehicles like your 2015 Audi A3. One point to check first would be the weight of the jet ski and trailer. A…

view full answer...

Answer 3

Both the Curt hitches you referenced part numbers #C11174 and #C11399 have a 200 lb tongue weight capacity so they would work well with a bike rack setup that weighs 150 lbs with the Saris Freedom Superclamp EX part #SA4025F. You still have to use…

view full answer...

Answer 4

Curt #C11399 trailer hitch for the 2016 Audi A3 is a great choice. It is a class I hitch which has a 1-1/4" receiver. It is a confirmed fit for your Audi A3. The Curt hitch also requires the use of stabilization strap #18050 if using the hitch…

view full answer...

Answer 5

As long as your 2018 Audi A3 Curt #C11399 you'd looked at because its not recessed as far under the vehicle, which makes it easier to find compatible hitch mounted accessories like bike racks. In order for a hitch mounted accessory to be…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 9

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Hitch Recommendation for a 2015 Audi A3

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching