Brake Controller Install Port on 2003 Windsport 35D F53 Chassis

Question

Question:

Do you know the location of the brake controller wiring under the dash and which adapter, the 3035 or the 3034 is required for the 2003 Windsport.

asked by: Andrew Q

0

Expert Reply:

Since your motor home is on the Ford F-53 chassis then you are in luck because there is a harness that you can use and I can tell you where you will need to connect it. On a 2003 Ford F-53 or 59 chassis the port to plug in a brake controller is up under the dash behind the instrument cluster. It is not easy to get to but it is there. Ford has a document Q-206 with pictures that should help.

The correct harness is # 3034-P.

expert reply by: Jameson C

0

Answer 1

The only wires that could be hot all the time on a trailer connector is the 12-volt hot lead, which is usually a black wire, and, if applicable, the auxiliary power wire, which is normally yellow or purple. The blue wire is usually for electric…

view full answer...

Answer 2

For your 2004 Winnebago Brave, you have a Ford F53 chassis and can absolutely use the Tekonsha Prodigy P3 #90195. You will be able to use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers #3035-P which will connect to your factory…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…

view full answer...

Answer 12

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Brake Controller Install Port on 2003 Windsport 35D F53 Chassis

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching