Trailer Hitch for a 2014 Toyota Prius 2

Question

Question:

Does this rack work for this car? 2014 prius 2

asked by: Minear

0

Expert Reply:

Draw-Tite trailer hitch # 24808 fits 2004 to 2009 Toyota Prius models but not a 2014. For a 2014 Prius you can use # 24847. It fits the 2014 Prius 2, 3, and 4 models so it will fit your Prius 2. I have linked a video to the right showing installation for you.

expert reply by: Michael H

0

Answer 1

The only way you'd be able to transport a small scooter with a Prius like your 2009 model is with a hitch and small trailer. The vehicle is not designed for carrying 250 lbs vertically at the rear. For a hitch you'd want the Draw Tite…

view full answer...

Answer 2

For your 2009 Toyota Prius the cargo carrier part #63155 is a really great option for a cargo carrier as it has a rise built into the shank unlike the other options which means it gives you the best possible ground clearance. Then for a hitch the…

view full answer...

Answer 3

We do have trailer hitches available for your 2007 Toyota Prius that have a 200 lbs Tongue Weight (TW) rating. I recommend going with the Draw-Tite Sportframe Trailer Hitch Receiver #24808 which is a Class I, 1-1/4" hitch receiver which has…

view full answer...

Answer 4

All the hitches that we have that are for a 2007 Toyota Prius are Class I hitches and have a 1-1/4 inch receiver opening. Due to the attachment points on the vehicle and the weight rating of a Class I hitch it is limited to carrying 2 bikes. Some…

view full answer...

Answer 5

For your upcoming cross country trip (and every trip, short or long, thereafter) I highly recommend a hitch-mounted bike rack for your 2008 Toyota Prius. I'm not sure if this was already the way you were leaning but even if your Prius isn't…

view full answer...

Answer 6

Betweeen the Curt #C11468 and Draw-Tite #24808 for your 2006 Toyota Prius, I recommend the Curt simply because we have found that they tend to have better welds and a thicker powder coat than other options on the market. All of this translates into a…

view full answer...

Answer 7

You're correct that using a hitch adapter does lose some of the stability. However, there are only 2 hitch receivers available or your 2009 Toyota Prius, parts #24808 and #C11468, and they're both Class I, 1-1/4 inch hitches. This is to…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Trailer Hitch for a 2014 Toyota Prius 2

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching