Trailer Hitch and Cargo Carrier Recommendation for 2009 Toyota Prius

Question

Question:

2009 Prius. Will ONLY be carrying less than 100lbs

asked by: Kitty L

1

Helpful Expert Reply:

For your 2009 Toyota Prius the cargo carrier part # 63155 is a really great option for a cargo carrier as it has a rise built into the shank unlike the other options which means it gives you the best possible ground clearance.

Then for a hitch the Draw Tite part # 24808 would be a really great option as well that fits your Prius. I attached an install video for the hitch as well as a review video for the carrier.

expert reply by: Jameson C

1

Answer 1

We do have trailer hitches available for your 2007 Toyota Prius that have a 200 lbs Tongue Weight (TW) rating. I recommend going with the Draw-Tite Sportframe Trailer Hitch Receiver #24808 which is a Class I, 1-1/4" hitch receiver which has that…

view full answer...

Answer 2

The only way you'd be able to transport a small scooter with a Prius like your 2009 model is with a hitch and small trailer. The vehicle is not designed for carrying 250 lbs vertically at the rear. For a hitch you'd want the Draw Tite part…

view full answer...

Answer 3

You're correct that using a hitch adapter does lose some of the stability. However, there are only 2 hitch receivers available or your 2009 Toyota Prius, parts #24808 and #C11468, and they're both Class I, 1-1/4 inch hitches. This is to…

view full answer...

Answer 4

All the hitches that we have that are for a 2007 Toyota Prius are Class I hitches and have a 1-1/4 inch receiver opening. Due to the attachment points on the vehicle and the weight rating of a Class I hitch it is limited to carrying 2 bikes. Some…

view full answer...

Answer 5

Betweeen the Curt #C11468 and Draw-Tite #24808 for your 2006 Toyota Prius, I recommend the Curt simply because we have found that they tend to have better welds and a thicker powder coat than other options on the market. All of this translates into a…

view full answer...

Answer 6

For your upcoming cross country trip (and every trip, short or long, thereafter) I highly recommend a hitch-mounted bike rack for your 2008 Toyota Prius. I'm not sure if this was already the way you were leaning but even if your Prius isn't…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...