Replacement Mounting Hardware Recommendation for a Thule Evolution 1600

Question

Question:

Will this fit the Thule evolution 1600 model 6410? Thanks

asked by: Outh

1

Helpful Expert Reply:

Yes, the Replacement EasySnap Mounting Kit for Thule Cargo Boxes, part # 43216 that you referenced is the correct replacement hardware for your Thule Evolution 1600 cargo box if it came with the EasySnap base. If not, then you will use the kit # TH04997 instead.

expert reply by: Jameson C

1

Answer 1

If your Evolution cargo box is the type that has a slot the feet slide in then you can use the EasySnap u-bolt replacement, #43216. There isn't another option for that fit and that entire assembly has been discontinued. If you have an older cargo…

view full answer...

Answer 2

I spoke with my contact at Thule and she informed me that this Thule QM3 Quick On-Off Mounting Hardware Kit #TH04997 would be the correct hardware kit for your 1997 Thule Weekender and should allow it to attach to the cross bars of your 2010 Honda…

view full answer...

Answer 3

Yes, you can drill new holes in your Thule Frontier Cargo Box in order to clear the rear hatch on your 2018 Subaru Outback Wagon. I also recommend using part #LT37467 to cover up the old holes so water doesn't get in. The only thing you need to…

view full answer...

Answer 4

We have the correct replacement mounting hardware for your Thule Evolution Cargo Box, but the QM3 #TH04997 is not the correct hardware kit unless your holes are 4 inches on center at the mounting locations. To replace the mounting hardware for your…

view full answer...

Answer 5

I spoke with my contact at Thule to see if your cargo box was possibly made by them. My contact confirmed that they did make several cargo boxes for Subaru and one of them did look like the Evolution 1600. My contact at Thule confirmed that the Quick…

view full answer...

Answer 6

In order to install a quick connect winch wiring harness on both the front and rear of your 2016 John Deere Gator 825i, I recommend using the Bulldog Winch Wiring Kit part #BDW20205. You will need 2 harnesses, 1 for the front of the ATV and 1 for the…

view full answer...

Answer 7

I spoke with my contact at Thule and he informed me that you should have no problem installing your Thule Evolution 1600 cargo box on the factory cross bars of your 2012 Honda Pilot Touring. You should consult your owners manual to determine the…

view full answer...

Answer 8

The Replacement Mounting Hardware for Thule Weekender Cargo Box #1032802 will work on a variety of crossbar shapes, including the factory bars on your 2019 Subaru Outback. So, yes; this kit will work to allow you to replace the hardware on a…

view full answer...

Answer 9

Yes, you can drill new holes in your Thule cargo box in order to mount this on your 2016 Subaru Crosstrek. When you drill the holes you need to make sure you maintain the correct spacing for your existing mounting hardware. After drilling new holes,…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 12

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Replacement Mounting Hardware Recommendation for a Thule Evolution 1600

Products Referenced in This Question

Continue Researching