Will the Kenda K353 Bias Trailer Tire # AM10066 Mount onto my 12 x 4 Trailer Rims

Question

Question:

Hello, I am looking at the Kenda K353 Bias Trailer Tire - 5.30-12 - Load Range C. The rims on my trailer are 12x4 and these tires say that they need a 12x4.25 wheel. Will these tires mount onto my rims without problems? Im not looking at buying new rims if I dont have to. Thanks a lot! Looking forward to hearing back from you.

asked by: Cody F

0

Expert Reply:

I spoke with our in house tire guy and yes, the Kenda K353 Bias Trailer Tire, # AM10066, will mount onto your 12 x 4 trailer rims without a problem.

expert reply by: Leah S

0

Answer 1

We have many available fenders, though none that are specifically meant to fit ShoreLand'r boat trailers. To find the correct fenders you need to know the dimensions between your mounting bracket slots and your wheel size. For example, the Fulton…

view full answer...

Answer 2

Trailer tire sizes ST145/80R12 and 5.30-12 both fit on 12 x 4-inch wheels and when mounted both will have similar overall diameters; 21.9-inches for a 5.30-12 like Kenda #AM30820 and 21.3-inches for an item like #AM31215. We offer both of these tire…

view full answer...

Answer 3

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 9

The three most common lug stud sizes for a trailer are 1/2"-20, 9/16"-18, and 5/8"-18. In order to make sure you get the correct lug nuts you need to measure the lug studs on the trailer now as we have no way to look this up for…

view full answer...

Answer 10

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...