Will Brophy Camper Hold-Downs # HSSF Fit 2013 Nissan Frontier Pickup Truck

Question

Question:

Hello, I have a Palomino B-600 Truck camper and want to install it on my 2013 Nissan Frontier long bed. Will the Brophy HSSF work? I cant imagine it wont but no one has asked yet? I had the truck camper on a Tacoma before but I prefer to buy a universal anchor this time. Thank you!

asked by: Paul C

0

Expert Reply:

I spoke with my contact at Brophy about your 2013 Nissan Frontier truck. They told me that they do not do a test fit of the Camper Hold Down, part # HSSF, other than on domestic trucks so they would not say they would fit or would not. They also said that it requires a minimum of 2 inches underneath the bed rail for installation. I have attached a link to an installation video for this hold-down you can check out.

expert reply by: Jeffrey L

0

Answer 1

The RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS54FR will raise the rear stock height of your 2023 Chevy Silverado 1500 by 1/2" - 1-1/2" according to RoadActive. The variances being the amount of tension you choose to set…

view full answer...

Answer 2

After speaking to my contact at Brophy, she informed me the Brophy Camper Hold Down #HSSF technically does not have a weight range. This product is limited only by the weight capacity of your 1995 Ford F-250, so you will need to consult your vehicle…

view full answer...

Answer 3

Yes, the Brophy camper tie downs like the #HSAB can be used with bed rail covers. If you check out the picture I attached you can see a set installed on a bed rail with plastic covers.

view full answer...

Answer 4

The Angled Hold-Downs for Truck Bed Campers #HSAB should work very well for your 2003 Chevy Silverado 2500. We had a customer leave us a review that said they were very easy to install and reinstall and that it only took a few minutes, so I think…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

It sounds like the purpose of getting the air helper spring would be to counteract the 1 inch compression you're getting in your rear suspension caused by the pin weight of your 5th wheel. If that's the case, I believe that the AirLift 5000…

view full answer...

Answer 7

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 8

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 9

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 10

Hi there David; we do have truck camper jacks that can work for your F-250 with a lift and large tires. What you can use are camper jacks from Brophy, which have a 17" to 67" lift range, which is the highest possible lift height. There are…

view full answer...

Answer 11

There is no weight capacity for the Brophy Clamp On Camper Tie-Downs #HSSF. The tie-down hardware kit #TDHP, that is used to secure the camper to the #HSSF tie-downs has a weight capacity of 3,000-lbs. My contact at Brophy said the tie-downs will…

view full answer...

Answer 12

We have spoken with Brophy in the past and for a Ford F-150 with aluminum body such as your 2017 model they recommend using the Brophy Clamp On Camper Tie-Downs part #HSSF. There won't be any issues with these tie downs and an aluminum bed so…

view full answer...