Measurements for Installing the Rack'em Double Barrel Trailer Tailgate Assist
Question:
Could you please tell me the length of the springs . I have an extended gate and I must know the length of the spring in order to position the hook on the gate.
asked by: Henry
Expert Reply:
The length of the spring or internal mechanism does not really matter. What matters is the measurement from the floor of the trailer up to the top of the mounting bracket for tailgate assist # RA-27C. The top of the bracket that attaches to the tailgate needs to be 44 inches from the trailer floor.
The main unit needs to be mounted so that the end with the chain that attaches to the tailgate is right at the end of the side rail.
Product Page this Question was Asked From
Rack'Em Double Barrel Utility Trailer Tailgate Lift Assist w/ Chain - 200 lbs
- Tailgate
- Trailer Tailgate
- Tailgate Assist
- Manual
- Gray
- RackEm
more information >
Continue Researching
- Video: Gorilla-Lift Utility Trailer Tailgate Lift Assist Installation
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized
- Q&A: Increasing Spring Tension for Lifting Ramp with Rack'Em Double Barrel Utility Trailer Tailgate Lift
- Shop: Rack'Em Double Barrel Utility Trailer Tailgate Lift Assist w/ Chain - 200 lbs
- Shop: Tailgate
- Shop: Truck Bed Tailgate Assist
- Video: Rackem Double Barrel Trailer Tailgate Assist Installation
- Q&A: Ramp Assist Recommendation for a 60 lb Ramp
- Q&A: Will Rackem Tailgate Assist Fit Trailer with 12 inch Side Rails and Tailgate 42 inches from Rail
- Q&A: Max Lifting Capacity of the Double Barrel Trailer Tailgate Assist
- Q&A: What Size Tailgate Can Be Used with the Rackem Double Barrel Trailer Tailgate Assist
- Shop: Gorilla-Lift Utility Trailer Tailgate Lift Assist w/ Cable - 300 lbs
- Search Results: spindle
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Article: Most Popular Wheel Bearings
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Video: etrailer Trailer Idler Hub Assembly Installation
- Article: Trailer Wiring Diagrams
- Search Results: hub
- Search Results: bearing buddy
- Article: Trailer Tire Sizing
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Hitch
- Video: etrailer Trailer Idler Hub Assembly Review and Installation
- Shop: Trailer Wiring
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: l44649
- Article: How to Tell the Weight Rating of a Trailer Axle