How to Tell if MORryde AllTrek 4000 Will Fit a 2021 Forest River Rogue armored Vengeance 372

Question

Question:

I have a 21 Forest River Rogue armored Vengeance 372 toyhauler. Will the alltrek 4000 work for my camper?

asked by: NICK R

0

Expert Reply:

Hey Nick, thanks for reaching out!

The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers # MR29DR will work as long as you have a 35" wheelbase (center axle to center axle) and it meets the specs in the attached photos for the qualifier.

expert reply by: Jon G

0

MORryde AllTrek 4000 Qualifier Guide Page 1
(click to enlarge)

MORryde AllTrek 4000 Qualifier Guide Page 2
(click to enlarge)

Nick R.

6/5/2024

Do i need a wet bolt kit or shackle for this? Which one do i get?

Reply

Jon G.

6/5/2024

@NickR As long as your shackle straps are 2-1/4" long (center eye to center eye) you'll be good to go. If you need some that have this measurement or you want to swap those out as well then I recommend picking up the MORryde Suspension Upgrade Kit # MR46ZR because this has 1/2" shackles that are a lot more durable than the ones that would have come on your trailer.

Reply

Nick R.

6/5/2024

@JonG i think mine are 3.5"

Reply

Jon G.

6/5/2024

@NickR I recommend checking the qualifier guidelines against everything on your trailer just to make sure everything is compatible with each other.

Reply

Answer 1

I can see from your pictures that you have the Lippert Edge Awning. You can replace just the motor on that awning. The correct replacement motor is the Replacement Motor for Lippert Solera Power Awnings #LC373566. You will need to partially extend…

view full answer...

Answer 2

Hi David; nope, the leaf springs don't need to be changed if going to the AllTrek 4000 equalizers. You just need to choose the right one based on your wheelbase (measured center-to-center of your wheels): - 33" Wheelbase: MORryde AllTrek…

view full answer...

Answer 3

According to MORryde the AllTrek 4000 #MR29DR does not have a minimum weight requirement. However, smaller axles typically aren't compatible since there are other requirements like wheel size. The equalizers require a minimum rim size of 15"…

view full answer...

Answer 4

The best way to find the correct replacement for your equalizer is by measuring the distance from the front shackle hole to rear shackle hole on your current equalizer. The 33" AllTrek #MR89DR has the holes spaced 6-1/2" on center while the…

view full answer...

Answer 5

The MORryde Alltrek 4000 kits offer the best cushioning so if you are wanting to improve the ride quality of your 2011 Stellar Eclipse that would be the route I would go with. If the wheelbase is 35 inches between the axles you would want the part…

view full answer...

Answer 6

The Replacement Lippert Correct Track Weld-On Axle Hanger, part #LC303918, has raised edges to fit the octagon cam. Since this hanger cannot sit flush against the axle the Correct Track Trailer Alignment and Lift Kit - Tandem Axle, part #RR23QX, is…

view full answer...

Answer 7

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 8

It looks like your MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR are longer than your previous equalizers were because your leaf springs are way too close to each other. The shackles should be creating more of a "W" shape instead…

view full answer...

Answer 9

Hey Nick, thanks for reaching out! The MORryde AllTrek 4000 Equalizers for Tandem Axle Trailers #MR29DR will work as long as you have a 35" wheelbase (center axle to center axle) and it meets the specs in the attached photos for the qualifier.

view full answer...

How to Tell if MORryde AllTrek 4000 Will Fit a 2021 Forest River Rogue armored Vengeance 372

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching