Will the 6 Bike Floor Stand # S64019 Work with Bikes with 29 inch Wheels

Question

Question:

Does this rack work for bikes that have 29 inch wheels? I realize that the rack is 29 inch but just thought I would check before ordering.

asked by: Matt

0

Expert Reply:

Yes the 6 Bike Floor Stand # S64019 would work well with bikes that have 29 inch wheels.

Check out the review video for this rack that I attached as well.

expert reply by: Jameson C

0

Answer 1

The 6 Bike Floor Stand - Swagman Park It 6 #S64019 can be secured outside using bolts through the rack into concrete or you can use a cable lock like etrailer 10' Long Cable Lock #e98891 to secure the rack to a building or tree for example. This…

view full answer...

Answer 2

For the price you really can't beat the Swagman part #S64019 over the Saris Mighty Mite #SA6210 especially if the application is indoors. The Swagman is more intended for inside a garage or house whereas the Saris is a bit more corrosion…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 7

The Replacement Fat Tire Rear Wheel Holder & Strap - Thule T1 or T2 Classic Platform Bike Racks - Qty 1 #7521568001 will work with your Sportworks 2 bike rack. If you're only wanting the strap alone The Replacement Fat Tire Wheel Strap for…

view full answer...

Answer 8

Yes, the Replacement Jack for HappiJac Truck Camper Jack System part #LC736514 (Model 4220) will fit your HappiJac Truck Camper Jack System Model 4150. If you need a new gearbox/motor then we have that as well, the Replacement Motor and Gear Head…

view full answer...

Answer 9

I went out to the warehouse to measure a jack and handle included in the Leveling Scissor Jack Set, #JSC-24. When compressed, the distance from the end of the crank bolt head to the center of the jack (between the two brackets) is 13-7/16 inches.…

view full answer...

Answer 10

To install the Erickson E-Track 5 foot section #E19148 on your trailer you can use rivets, screws, or weld it to the trailer. Since your trailer is aluminum, welding may not be an option since the E-Track is steel. I recommend using screws, or bolts…

view full answer...

Answer 11

Yes it will; a golf cart is absolutely compatible for use with the Erickson tie-down kit you asked about, which is the following part number: - Erickson ATV E-Track Tie-Down Kit w/ Ratchet Straps and Wheel Chocks #EM09160 You just need to ensure your…

view full answer...

Will the 6 Bike Floor Stand # S64019 Work with Bikes with 29 inch Wheels

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching