Difference Between Saris and Swagman Indoor 6 Bike Racks

Question

Question:

For the standing 6-bike storage-racks, what are the differences between these two brands beyond price? Which is sturdier when only 1 bike is in it? Either better/worse for disc brakes? thx!

asked by: KD

0

Expert Reply:

For the price you really can't beat the Swagman part # S64019 over the Saris Mighty Mite # SA6210 especially if the application is indoors. The Swagman is more intended for inside a garage or house whereas the Saris is a bit more corrosion resistant and can be used indoors or outdoors.

expert reply by: Jameson C

0

Answer 1

Yes the 6 Bike Floor Stand #S64019 would work well with bikes that have 29 inch wheels. Check out the review video for this rack that I attached as well.

view full answer...

Answer 2

The 6 Bike Floor Stand - Swagman Park It 6 #S64019 can be secured outside using bolts through the rack into concrete or you can use a cable lock like etrailer 10' Long Cable Lock #e98891 to secure the rack to a building or tree for example.…

view full answer...

Answer 3

You could do that if you wish, you'll just want to make sure that the heat shield is NOT sandwiched between the hitch and the chassis of the vehicle at any point. We frequently hear from folks with concerns about the vehicle being harmed…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, the Curt hitch would be more difficult to install. On our website we have a installation difficulty rating, from 1 to 10, on hitch receivers. The etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2", part…

view full answer...

Answer 6

Bike storage rack #S64019 is more of an indoor type of rack like for a garage or shed. For an indoor or outdoor rack take a look at #S64016. It is zinc and powder coated to stand up to the elements. The steel tubing is under a 1/4 inch thick so it is…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Difference Between Saris and Swagman Indoor 6 Bike Racks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching