Does Draw-Tite Front Hitch Fit 2024 Chevy Silverado 1500 LTZ

Question

Question:

HELLO, 2024 SILVERADO 1500 LTZ, FRONT HITCH. WILL IT FIT? NO CHOICE OF SUB-MODELS. THIS TRUCK HAS FRONT RADAR. 5.3 ENGINE. PLEASE ADVISE.

asked by: PAUL P

0

Expert Reply:

Hello Paul,

I checked with Draw-Tite and yes, the Draw-Tite Front Mount Trailer Hitch Receiver # DT44HR is a fit for your 2024 Chevy Silverado 1500 LTZ.

expert reply by: Kyle S

0

Answer 1

Yes, the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR will fit your 2024 GMC Sierra 1500 with the 3.0L Duramax diesel with the max trailering package.

view full answer...

Answer 2

Draw-Tite's fitment guide has no stipulations on sub models for the 2023 GMC Sierra 1500 so you would be able to install the Draw-Tite Front Mount Trailer Hitch Receiver #DT44HR. You will have to trim the fascia and if you have an AEV or Warn…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

The AL-KO trailer hub part number 8700 that you have is a 3,500 lb trailer hub/drum with a 5 on 4-1/2 inch bolt pattern. Based on that the #AKHD-545-35-EZ-K is the correct fit and would work great.

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

I checked with Curt and they do show the Curt Trailer Hitch Receiver part #C13233 as a fit for a 2022 Volvo XC90 All Models which includes the Recharge.

view full answer...