Can Inno Tire Hold HD Bike Rack # IN25RR Carry Bikes with Fenders

Question

Question:

Will the inno HD rack work on bikes with fenders

asked by: Randy

0

Expert Reply:

Hey Randy, yes the Inno Tire Hold HD Bike Rack # IN25RR can work to carry bikes with fenders but they would need to be smaller fenders and not the longer ones you sometimes see like on cruiser bikes. Nearly all e-bike fenders will work with this bike rack.

expert reply by: Jameson C

0

Answer 1

The Inno Velo Gripper Bike Rack for Truck Beds part #INRT202 has a weight capacity of 33 lbs so it would not work with an 80 lb e-bike unless the battery was removed. Instead, for a 2016 Toyota Tacoma with deck rail system I recommend the Thule…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hey Randy, yes the Inno Tire Hold HD Bike Rack #IN25RR can work to carry bikes with fenders but they would need to be smaller fenders and not the longer ones you sometimes see like on cruiser bikes. Nearly all e-bike fenders will work with this bike…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 5

Based on the information you gave, although I can't help with the axle (other than to state it is a 3,500 lbs axle). Dexter mobile home axles were designed for one time use and weren't really documented for replacement parts, but because you…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

It does sound like the Prodigy P2 #90885 controller was set too high and caused you to experience brake reverberation. This happens when the brakes are set too high and cause the trailer to jerk when they are applied. When the trailer jerks, the…

view full answer...

Answer 8

The Automatic leveling feature of the Redarc Tow Pro Liberty #RED24FR just means that you can mount the main body of the controller any direction and the active calibration system will detect the correct direction of travel to make sure you are…

view full answer...

Answer 9

To determine if the Replacement Shock for Titan Model 6 and 10 Brake Actuators, part #T1242600 will work to replace your Gabriel number 610712 (T2032) shock, you will need to verify a few quick measurements. Part #T1242600 will work as a replacement…

view full answer...

Answer 10

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Answer 11

The mounting holes on the Curt 5-Position Adjustable Channel Bracket #C48650 measure 10" center of hole to center of hole.

view full answer...

Answer 12

For a made in the USA aluminum ball mount we only have adjustable units like the Flash Secure 2-Ball Mount #DTSTBM6600-2S which includes stainless steel hitch balls as well. The Fulton #F97CR you found as well as the similar Curt #C74WR and Brophy…

view full answer...

Can Inno Tire Hold HD Bike Rack # IN25RR Carry Bikes with Fenders

Product Page this Question was Asked From

Continue Researching