Replacement for Gabriel Shock Model 610712
Question:
Im not sure this is what I need. My customer has a large boat, the trailer hitch has 2 gabriel shocks to push the clamp in place after it is connected. There are no wires that connect to the boat or brake system, so the discription of brake actuator is throwing me off. I could send a picture of the unit if that wood help. The gabriel # is either t2032 or 610712 - both #s are stamped on the shock. Thank you for your help on this.
asked by: Redge P
Expert Reply:
To determine if the Replacement Shock for Titan Model 6 and 10 Brake Actuators, part # T1242600 will work to replace your Gabriel number 610712 (T2032) shock, you will need to verify a few quick measurements.
Part # T1242600 will work as a replacement for a shock with the following dimensions:
Extended length: 8-1/16"
Collapsed length: 6"
Inner diameter of mounting rings: 0.63" and 0.90"
Outer diameter of body: 1.63"
I've a dimensional diagram to illustrate.
Product Page this Question was Asked From
Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Shocks
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Replacement Shock for Dexter Model 6 and 10 Brake Actuators
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Drum
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Disc
- Shop: Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators
- Q&A: Replacement Surge Brake Coupler For Aluminum Boat Trailer With 10,000LB Coupler
- Shop: Dexter Hydraulic Brake Line with Fittings - 25" Long
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Drum - Zinc - 2-5/16" Ball - 12,500 lbs
- Shop: Kodiak Hydraulic Brake Hose - 3/16" Male Fittings w/ Stainless Flares - 1/8" ID - 2'
- Search Results: t2374400
- Search Results: t2374600
- Video: Titan Replacement Master Cylinder Assembly Installation
- Video: Review of Demco Air Force One Replacement Quick Disconnect Fitting - SM99613
- Search Results: brake line
- Video: Titan Brake Actuator T1242600 Review
- Video: Titan Brake Actuator T2374600 Review
- Video: Review of Demco Brake Actuator - Replacement Shock - DS12426
- Video: Review of Dexter Replacement Orifice Connector - T1209800
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Opening Sizes of the Titan Orifice Connector 1209800
- Q&A: Dimensions of Replacement Damper for Model 20 Actuator
- Video: Review of Dexter Axle Brake Actuator Parts - Replacement Damper - DX76FR
- Q&A: When Using Bearing Buddy Bearing Protectors Do I Need To Repack Bearings Periodically?
- Search Results: rubber grommet
- Search Results: grommet
- Q&A: Replacing Rubber Bearing T1020900 and Nylon Washer T1861900 on a Model 10 Actuator
- Q&A: Replacement Parts to Rebuild a Titan Model 10 Drum Actuator Part # T2404600
- Q&A: How to Lift a LOOK Trailer with Torsion Axles
on Accessories and Parts
