Bearing, Seals, And Caps For A 2008 Bear Boat Trailer
Question:
I need to replace the bearings on by 2008 Bear boat trailer. The boat is a 18 ft G3. Which kit is recommended? The bearing numbers are L44649 and L68149. The grease seal measures 1.75 inch id and 2.625 inch od. There is no cotter pin. A washer with a tab is used as the keeper. I also need grease caps. The diameter of the old ones is 1.98 inches.
asked by: William S
Expert Reply:
Hi William,
It looks like we have everything except for the grease seal. Could you measure the spindle for the inner diameter and hub bore hole for the outer diameter one more time to confirm? The Hub Bearing Kit # BK2-100 has the correct bearings and tang washer but uses a 10-19 grease seal # 58846 (ID: 1.719" - OD: 2.565"). For the grease caps you can use part # RG04-040 for easy lube spindles or # RG04-020 for standard spindles.
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.99 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
Continue Researching
- Video: TruRyde Bearing Kit for #84 Spindle Installation
- Search Results: bearing tools
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Timken Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: 7-Piece Installation Set for Bearings, Races, and Seals
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Search Results: bearing buddy
- Article: Most Popular Wheel Bearings
- Shop: Trailer Hitch
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Search Results: lug nuts
- Article: Trailer Tire Sizing
- Shop: Trailer Wiring
- Q&A: What is the Difference Between Load Range B and C Trailer Tires
- Search Results: lug nut
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Shop: Kenda Karrier ST205/75R15 Radial Trailer Tire with 15" Black Mod Wheel - 5 on 4-1/2 - LR D
- Shop: Brake Controller
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Suspension Enhancement
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Search Results: l44649
- Shop: Gooseneck Hitch
- Search Results: l68149
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement