Front Roadmaster Sway Bar Recommendation for 2014 Thor 31L

Question

Question:

Hello, looking for a roadmaster front anti sway bar for a 2014 ford e450 Thor 31L motorhome. Also 2 end links to go with it. Thanks. Dave

asked by: David M

0

Expert Reply:

Hey David, for your 2014 Thor 31L Class C motorhome you would want the Roadmaster Front Sway Bar part # RM-1109-149 which is a confirmed fit. This is designed to use factory endlinks though so you'd need to reuse what you have or get new ones from a GM dealer.

expert reply by: Jameson C

0

David

4/11/2024

Thank you Jameson

Reply

Answer 1

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 2

The Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets #RM47MR typically comes centered and you would only need to make adjustments after installation and testing to see if it continues to pull. If you adjusted it all the way out to where…

view full answer...

Answer 3

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 4

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 5

For a 2023 Entegra Odyssey 24B on a Ford E-450 chassis you would need the Roadmaster Front Anti-Sway Bar - 1-3/8" Diameter #RM-1139-189 and rear #RM-1139-147. If you also wanted to add in a steering stabilizer then you'd need the Roadmaster…

view full answer...

Answer 6

The Roadmaster #RM-1139-140 and #RM-1139-148 are both replacement anti-sway bars for a Ford F550 or F53 Class A motorhome chassis. Both bars are 1-3/4 inches in diameter. The #RM-1139-140 fits models with a GVWR of 22K-24K, and the #RM-1139-148 fits…

view full answer...

Answer 7

The Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-143 can use your factory u-bolts if they are long enough. If they are not, then Roadmaster recommends using the 7/8 inch diameter u-bolts that are longer (most likely the larger diameter due…

view full answer...

Answer 8

We have the Roadmaster Exact Center Steering Stabilizer part #RM47MR that fits your 2021 Jayco Greyhawk 27U that has an OEM factory damper and would work really well to improve handling.

view full answer...

Answer 9

To replace/upgrade the bushings on the rear factory sway bar of your 2009 Class A Newmar Canyon Star RV you need one of the following Roadmaster kits based on the diameter of your factory sway bar: - 1-3/8" Diameter #RM-4139-300 - 1-1/2"…

view full answer...

Front Roadmaster Sway Bar Recommendation for 2014 Thor 31L

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching