Steel 16 inch Trailer Wheel with 8 Lug Bolt Pattern and .5 inch Offset

Question

Question:

looking for 4 steel16inch wheels with 8x6.5 bolt pattern with a 0.5 offset

asked by: Willis S

0

Expert Reply:

Hey Willis, we have one steel wheel that covers everything you are lookin for with the Dexstar part # AM20766 which is a 16 inch diameter steel wheel with an 8 on 6-1/2 inch bolt pattern and a .5 inch offset.

expert reply by: Jameson C

0

Willis

4/3/2024

I wanted a steel 16 inch wheel with a negative .5 offset

Reply

Jameson C.

4/3/2024

@Willis Sorry about that. We don't have that offset at this time.

Reply

Answer 1

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 2

I believe the wheel that they are refering to is the Dexstar Conventional Steel Wheel #AM20766. This has the same 8 on 6-1/2" lug pattern that the 1953 Chevrolet Advance Design Trucks had. This wheel is only 16" in diameter where the…

view full answer...

Answer 3

You can measure the diameter of the wheel and the diameter of the baby moon mounting ridge on the wheel if you care to (see photo), but because the Dexstar Conventional Steel Wheel you have is a standard automotive size, you can simply purchase…

view full answer...

Answer 4

To determine whether or not the Dexstar Conventional Steel Wheel w/ +0.5" Offset #AM20766 will fit your 1952 GMC Pickup you will simply need to compare the specs. The rim dimensions are 16" diameter x 6" wide Bolt pattern is 8 on 6-1/2…

view full answer...

Answer 5

The 8-14.5 tires are an older metric size no longer used today. Therefore, you would need to replace these along with the wheels in order to update them. In order to see if we have any options for you, we'd first need to determine the bolt…

view full answer...

Answer 6

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 7

Do you see the three raised bumps on the center circle section of your wheel? That's where a baby moon like the part #AM90086 fits over. You need to measure that diameter. If it's right at 9-1/4 inch this cover is what you'd need.

view full answer...

Answer 8

The best option we have for a vintage style hub cap is the Americana Baby Moon Trailer Wheel Center Cap part #AM90086 which is specific to the Dexstar Conventional Steel Wheel part #AM20766. I could not confirm fit of any other style hub cap for this…

view full answer...

Answer 9

Typically a Dexter 7k axle will have a diameter of 3 inches and an 8k axle will have a diameter of 3-1/2 inches. The thicker the axle the more weight it can handle. There really isn't an advantage to going with higher capacity leaf springs than…

view full answer...

Answer 10

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 11

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 12

Karrier and Loadstar are two different brand names used by Kenda. There's no difference in quality or function between the two brand names. For a ST175/80-13 Radial trailer tire in load range D, I'd recommend part #AM10210 if you're…

view full answer...

Steel 16 inch Trailer Wheel with 8 Lug Bolt Pattern and .5 inch Offset

Product Page this Question was Asked From

Continue Researching