Appropriate Replacement Bolster Brackets for Trailer Carrying 3000-lb Boat/Motor
Question:
My bolster brackets need replacing but they are 11.25inch tall by 4.5inch wide and use two U-bolts to attach to the frame each. I do not see anything in that size but I see that others with heavier boats are using the singles. My boat and motor weigh 3000lbs. Should I be using a safety factor of two to find bolster brackets. My trailer axles and leaf springs we at least 2x what I need in weight capacity for my boat. Please let me know your opinion on this. Thanks,
asked by: David B
Expert Reply:
We offer bolster brackets both singly and in sets of four and in a range of sizes and types for both bunks and rollers. The link provided will let you see all available parts. You can use the filters at the left-hand side of the page to select parts by type and size.
Extra capacity in any system is never a bad idea but these components are not weight-rated so as long as you find a suitable size and type you should be fine.
Product Page this Question was Asked From
CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Boat Trailer Parts
- Bunks
- Bunk Bracket
- Swivel Bracket
- 12 Inch Tall
- 2 Inch Tall
- 1-3/8 Inch Wide
- 2-1/2 Inch Wide
- Galvanized Steel
- 3-1/2 Inch Long
- CE Smith
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 13" - Qty 4
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Grease Seal
- Shop: CE Smith Double U-Bolt Bolster and Swivel Bracket Assemblies - Galvanized - 16-1/4" - Qty 4
- Shop: CE Smith Carpeted Johnboat Bunk Board for Boat Trailers - 2' Long - Qty 1
- Shop: CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards - Gray - 18' Long x 18" Wide
- Shop: CE Smith U-Bolts - Galvanized - 3-13/16" Long x 3-1/16" Wide x 1/2" Diameter - Qty 2
- Search Results: bunk board carpet
- Search Results: ce10002g~4
- Video: Review of CE Smith Boat Trailer Parts - Roller and Bunk Parts - CE10002G-4
- Q&A: How High Will CE Smith 13 Inch Bolster Bracket Sit Above 3 Inch Crossmember
- Q&A: Determining Length of Bolster Bracket for New Bunk System on Boat Trailer
- Q&A: Can Boat Swivel Bunks Be Tightened So they Won't Move
- Q&A: Would Bunk Brackets # CE10002G-4 Have Capacity for 2,060 lb Boat
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Shop: Trailer Hitch
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Search Results: 44649
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Most Popular Wheel Bearings
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Article: Trailer Tire Sizing
- Search Results: 25580
- Shop: Brake Controller
- Shop: Gooseneck Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: dust cap