Demco Hijacker Capture Plates to Fit with Rota-Flex Pin Box

Question

Question:

Hello, I have a 2024 Ram 3500 with the puck system. Im looking at the auto-sliding demco and it states about needing a locking plate for certain king pins. The trailer Im getting comes with a Curt Rota Flex. I couldnt find the part # for the locking plate needed. Thanks for any help provided.

asked by: Brian G

0

Expert Reply:

Thanks for reaching out, Brian!

You'll need the Demco Autoslide Capture Plates # DM6171 to replace the capture plates that come on the Demco Hijacker for your 2024 Ram 3500. I recommend using one of the following Hijacker part numbers since they come with the puck anchors already installed on the hitch and you don't have to remember to pick up any adapters or anything:

- 18K # DM69GV
- 21K # DM89GV

expert reply by: Jon G

0

Answer 1

Yes, there is an auto-slide 5th wheel hitch option that will fit the puck system in your 2022 Ram 2500. - Demco Autoslide 5th Wheel Hitch w/ Slider #DM89GV This 5th wheel hitch is made in the USA and will drop into the factory prep system in your…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that&#39;s going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 3

The OEM prep package consists of 4 &quot;pucks&quot; in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The…

view full answer...

Answer 4

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

The B&amp;W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you&#39;re looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you&#39;ll be able…

view full answer...

Answer 7

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from…

view full answer...

Answer 8

Hey David, from previous customers of ours who have the same 2020 Keystone Raptor 424 we have determined that your pin box style is the Lippert 1621 which means for a Gen-Y gooseneck adapter you&#39;d want the #GY58GR that you referenced.

view full answer...

Answer 9

The B and W Patriot slider is the only hitch unfortunately that can&#39;t be adapted to fit the OEM rails of your 2024 Ram 2500 as none of the adapters can work with it. So Mike what that means is that no matter how you slice…

view full answer...

Answer 10

Yes, you are going to also need the Demco Autoslide Capture Plates for Trailair Rota-Flex Pin Boxes #DM6171 when using the Demco Autoslide 5th Wheel Trailer Hitch w/ Slider #DM8550040 with your Road Armor pin box. For a suspension enhancement I…

view full answer...

Answer 11

I am sorry but we do not have an AC cover with those dimensions. The closest option we have is the Replacement RV Air Conditioner Cover for Penguin and Dometic Air Conditioners item #AT3308046006 which measures 40-1/2" long x 29"…

view full answer...

Answer 12

If you have the Gooseneck versions of the Curt CrossWing ( #C92DR or #C32DR) you unfortunately would not be able to use the Rota-Flex with it. The pivoting head causing too much strain for the single point of contact you have with a gooseneck…

view full answer...