A-Frame Toolbox Options For A Big Tex 60PI

Question

Question:

Looking for a recommendation for a tongue mounted tool box for my Big Tex 60pi.

asked by: Dve S

0

Expert Reply:

How large of a toolbox are you looking for? These toolboxes are not custom fitted, so there are going to be a lot of options as far as height, depth and cubic footage.

Based on pictures I can see of these Big Tex 60pi trailers, there is a good amount of open space on the tongue. Your best bet will be to measure out the available area to get an idea of the appropriate width and depth. You will probably be looking at something 34" or 36" wide. We do not have any kind of build sheet that will tell us the exact dimensions of the A-frame, but you should be able to take a tape measure to it and get a really good idea of what will fit.

If you do end up going with a 36" wide toolbox, what I recommend is the RC Manufacturing T-Series Trailer Tongue Tool Box # 350975. Overall it is 36" long x 20" tall x 16" wide and it is made of diamond plate aluminum. It is also available in black # 313-TM362016M.

We do have plastic toolboxes such as part # 3371701680 if you are looking for something a bit less expensive.

If you are able to get some measurements of the available space on the A-frame tongue, feel free to send those my way and I am happy to send you some appropriately sized options.

expert reply by: Jesse M

0

Answer 1

The closest box we have to the dimensions you gave is the RC Manufacturing T-Series Trailer Tongue Toolbox - A-Frame - Steel - 5.2 Cu Ft - Black #313-TM362016M is 36 inches at the rear and 21-1/2 inches at the front. I've attached a diagram…

view full answer...

Answer 2

The etrailer E-Track Roller Idler #e67HR is 3" from the top of the e-track to the bottom of the roller.

view full answer...

Answer 3

The Bulldog Winch Ratcheting Wheel Tie-Down Strap #BDW20362 is designed to connect to a D-Ring type of connection point so you wouldn't need to install an e-track on your trailer. For your application I recommend installing the Brophy D-Ring Tie…

view full answer...

Answer 4

For your Big Tex 90PI trailer, I recommend checking out the: -RC Manufacturing T-Series Trailer Tongue Tool Box #350980. This toolbox has a cargo capacity of 2.6 cubic feet, measures 30" long x 14-1/2" tall x 14-1/2" wide, and is…

view full answer...

Answer 5

The Pollak Heavy Duty 7-Way part #PK11720 that you referenced is a heavy duty style 7-way. If you check out the attached diagram you'll see how it should be wired.

view full answer...

Answer 6

To install the TorkLift PowerArmor Locking Battery Box #TLA7700L you'll need to use the included self-tapping screws to mount the box to your trailer tongue. You can do this either directly to your frame, using the extension brackets if they are…

view full answer...

Answer 7

The DeeZee Specialty Series Trailer Tongue Toolbox #DZ91717P is made of tough polyethylene plastic that is naturally non-corrosive and sturdy but it is not expressly meant for a person to step or stand on it. A child or a person that weighs 110-lbs…

view full answer...

Answer 8

I am happy to help you find a trailer tongue tool box for your Sure Trac trailer Andy. When you say you have 44 inches from the widest point, I believe you are referring to 44 inches up from the widest point of the A-frame towards the tailgate. You…

view full answer...

Answer 9

While a lot of wheels have cross compatibility with 1/2"-20 or 9/16"-18 wheel bolts, the Karrier ST235/80R16 Radial Trailer Tire with 16" Aluminum Wheel #KE39JR states that it only works with the 1/2"-20 wheel studs. We do have…

view full answer...

Answer 10

There sure is! The RC Manufacturing T-Series Trailer Tongue Tool Box - A-Frame - Aluminum - 2.6 Cu Ft in Silver #350970 or Black #350980 will fit in perfectly in your Stromberg Carlson Trailer Tray Cargo Carrier for A-Frame Trailers - 300 lbs…

view full answer...