Installation Instructions for the Curt 2 to 3 Wire Tail Light Converter
Question:
curt 56196 when flasher on it flashes tail lights and truck flashing amber turn signals. Trailer should flash like truck amber turn signals ?
asked by: Jeff
Expert Reply:
It sounds like something may have got wired wrong on the Curt 2 to 3 Wire Tail Light Converter # C56196. To install this converter correctly you'll need to:
1. Use the double-sided tape on the
converter to secure it at the rear of the
TOWING vehicle.
2. Connect Yellow Wire (Input) to TOWING
vehicle’s Left Turn/Brake Wire.
3. Connect Green Wire (Input) to TOWING
vehicle’s Right Turn/Brake Wire.
4. Connect Yellow Wire (Output) to TOWED
vehicle’s Left Turn Wire.
5. Connect Green Wire (Output) to TOWED
vehicle’s Right Turn Wire.
6. Connect Red Wire (Output) to TOWED
vehicle’s Brake Wire.
7. Connect White Wire (Ground) to the chassis
of the TOWING vehicle. (TOWED vehicle
connection must include ground.)
If you're still having issues after this, then you likely just have a bad unit and will need to replace it.
Product Page this Question was Asked From
Curt 2 to 3 Wire Tail Light Converter
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Tail Light Converter
- Universal
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Search Results: curt 56196
- Article: Trailer Wiring Diagrams
- Shop: Vehicle Tow Bar Wiring
- Shop: Hopkins Tail Light Converter - LED Compatible
- Shop: Curt 2 to 3 Wire Tail Light Converter
- Search Results: 2 to 3 wire trailer wire converter
- Shop: Roadmaster Brite-Lite Wiring Converter
- Q&A: Troubleshooting Wiring of Indicator Lights
- Q&A: How to Wire 3rd Brake Light on Trailer When Using Vehicle to Vehicle Tail Light Converter # C56196
- Q&A: Is It Normal for Brake Lights Instead of Turn Signals to Flash When Using Hazards With Converter
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Q&A: Troubleshooting Install of Turn Signal Converter Not Functioning on Trailer with Separate Lights
- Q&A: Taillight Converter Recommendation for Changing a Vehicle from Combined to Separate Turn Signals
- Q&A: Wiring a Third Brake Light on a Camper Shell for a 2005 Ford Ranger
- Video: Review of Hopkins Wiring - Trailer Connectors - HM48847
- Search Results: base plates
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Wiring
- Shop: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit
- Video: Roadmaster Tow Bar Wiring - Splices into Vehicle Wiring - RM-15267 Review
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Base Plate for Tow Bar
- Shop: Roadmaster Battery Charge Line Kit for Towed Vehicles
- Search Results: tow bar
- Search Results: base plate
- Video: Roadmaster Battery Charge Line Kit Review
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Hitch
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: rm~88400