Matching Recliner to Thomas Payne Sofa # TP59FR

Question

Question:

do you have available 2 matching swivel recliners to match part # tp59fr in brown?

asked by: Rory J

0

Expert Reply:

The closest swivel recliner match we offer to the Thomas Payne Sofa part # TP59FR is the Swivel Glider Recliner part # TP99FR. They are both very dark brown in color although the recliner might be a little darker.

expert reply by: Jameson C

0

Answer 1

From the center of the jack tube to the outside edge of the head cover on the Bulldog Powered Drive Trailer Jack #BD500199 is 4",and the head cover extends out 1" from the edges of the jack tube. I've attached some diagrams for you to…

view full answer...

Answer 2

Are you looking for a 26 inch wide chair to fit through a 26 inch wide door by chance? We don't have any used options but we do have gliders that fit through a 26 inch wide door like the #195-000029. Here are dimensions of this chair: Overall…

view full answer...

Answer 3

I went out to our warehouse to assist with the dimensions of the Bulldog Powered Drive Trailer Jack - Drop Leg - A-Frame - 14" Lift - 4,000 lbs - Black #BD500199. From the top of the mounting plate to the bottom of the motor housing is 12-7/8…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

I do have suspension enhancement options for a 2002 Workhorse P42 Chassis but there are no air bags available unfortunately. Instead, you can use the Timbren Rear Suspension Enhancement System. The correct one will be based off the suspension. The…

view full answer...

Answer 6

We have scissor jacks that will work for you, just keep in mind that scissor jacks are only designed to stabilize a portion of your weight as opposed to the full 15,000 lbs. The scissor jacks with the largest capacity are the Ultra-Fab Ultra Scissor…

view full answer...

Answer 7

The support capacity of the scissor jacks are for each jack individually. So the part #UF48-979031 comes with two jacks that are each rated for 6,500 lbs. So you'd multiply that by how many jacks you end up using

view full answer...

Answer 8

If you check out the picture I attached you can see that when the Stromberg Carlson Bunk Adapter part #CC-255 is installed you still have really great access to the propane tanks of the RV.

view full answer...

Answer 9

You'll need a taillight converter to combine the right turn, left turn and brake lamp signals into two circuits (right turn/brake and left turn/brake) for the trailer. First, I'd remove the existing 6 pin square connector on the RV, as…

view full answer...

Answer 10

To flat tow your Ram 2500, you'll need a tow bar, base plates, safety cables, a wiring solution, a supplemental braking system and possibly a high/low adapter. I really like the equipment offered by Roadmaster, the quality and ease of use are…

view full answer...

Answer 11

You'll need two things in order to convert your 6 pin square plug to a 4 way connector, Hopkins Endurance 4-Way Flat Trailer End Connector, #HM48110, and Vehicle to Vehicle Tail Light Converter, #118158. Since motorcycles use combined wiring,…

view full answer...

Matching Recliner to Thomas Payne Sofa # TP59FR

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching