Parts Recommended For Installing a Trailer Hitch Receiver, 7-Way & Brake Controller On 2024 Palisade

Question

Question:

Can you tell me what parts are recommended for a full tow package with wiring and brake controller on my 2024 Kia Telluride?

asked by: Isaac

0

Expert Reply:

I recommend the etrailer Trailer Hitch Receiver # e45ZR for your 2024 Kia Telluride. I prefer this one as it has the matte black powder coat finish which I find looks better. It also has a hidden cross tube providing for a clean factory appearance.

The Universal Wiring Harness # 22551 will provide you with a 7-way connector and all the wiring to properly install it and a Brake Controller # TK63VR on your Telluride. If you prefer to not have a large controller on your dash the Redarc Liberty # RED24FR will connect to the Tekonsha connector on the harness using an Adapter # 331-TPH-017.

You will need a Mounting Bracket # 18138 to secure the 7-way to your Palisade. We also have the Curt Bracket # C58000 if you do not want to drill into your rear fascia to secure the 7-way.

expert reply by: Bud M

0

Answer 1

To tow a trailer with any vehicle you need a trailer hitch, ball mount kit, and wiring. Since you are needing to tow a trailer that has brakes with your 2018 BMW X5 you will also need a brake controller. The trailer hitch that I recommend using is…

view full answer...

Answer 2

I would be happy to help! It sounds like you have a pretty good plan so far of using the Curt Trailer Hitch Receiver #C13290 and a 4-way connector #C59496 on your 2016 Mercedes-Benz GLC 300. Since your Little Guy Mini Max Trailer has a electric…

view full answer...

Answer 3

There are ways for you to mount your two connectors onto the Draw-Tite #75280. I recommend taking a look at the Curt Easy Mount Bracket #C58000, which uses your hitch as a mounting point for both of your connectors. I have added a link to a video…

view full answer...

Answer 4

You are correct. The Curt Easy Mount bracket #C58000 would not allow you to also use an anti-rattle device such as #RM-061 that has to clamp around the hitch receiver. You could go with an alternative anti-rattle device such as #63232. Or a different…

view full answer...

Answer 5

For your 2020 Toyota Highlander, I recommend using the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C99FR with the No-Drill Mount for Electrical Mounting Bracket - Short #18140 and the #ETBC7 or whatever 7-way you will be using.…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 8

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Parts Recommended For Installing a Trailer Hitch Receiver, 7-Way & Brake Controller On 2024 Palisade

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching