How To Mount A Pollak 6-Pole Trailer Wiring Socket On A 2019 Subaru Outback

Question

Question:

The 2019 Subaru Outback Wagon has about a 7/8 inch hole for the vehicle side trailer socket. The trap door opening is only about 2 1/2 x 2 1/2 inches. Doesnt seem like either the 6 round or the 7 blade will fit. Any ideas?

asked by: Wayne F

0

Expert Reply:

If you're trying to attach the Pollak 6-Pole, Round Pin, Trailer Wiring Socket # PK11609 to the back of the Subaru for towing a trailer and there isn't a big enough cutout in the paneling to accommodate the socket then you'll need to get some brackets to mount it to the hitch. You can use a no-drill bracket # 18136 to connect to the hitch and then 6-pole bracket # PK11771 off of it for the # PK11609 to mount to.

expert reply by: Kevin C

0

Answer 1

On the 6-way part #PK11609 the section behind the mounting flange where the wires attach is 1-3/8 inches in diameter. The distance between the mounting holes is 2-7/8 inches, overall width of the front is 3-1/4 inches and overall height is 2-1/8…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 5

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 6

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Congrats on the new car! For your 2024 Subaru Outback, I recommend the etrailer Hitch item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. I really like this hitch because it mounts behind the rear bumper cover…

view full answer...

Answer 9

The best trailer hitch for your 2019 Subaru Outback Limited is the Curt #C13206 because it has the best bumper clearance among hitches that fit your car; this hitch is a fit for both the 2.5i Limited and 3.6R Limited. This Class III, 2" trailer…

view full answer...

Answer 10

There are really two main types of trailer hitches for a 2019 Subaru Outback, visible like the etrailer Trailer Hitch Receiver part #e98847 and hidden like the etrailer Trailer Hitch Receiver part #e42TR. The visible hitch means you can see the cross…

view full answer...

How To Mount A Pollak 6-Pole Trailer Wiring Socket On A 2019 Subaru Outback

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching