Tube Dimensions Of The etrailer Square Direct Weld Jack w/ Footplate # TJD-8000S

Question

Question:

That is the size of the middle square tubing? Description states 2-1/4” outer tubing and 2” inner tubing, but there are three of them. Thank you

asked by: Benjamin F

0

Expert Reply:

The innermost tube of the Square Direct Weld Jack w/ Footplate # TJD-8000S is actually the drop leg and is less than 2". The black outer tubing is 2-1/4" and the aluminum inner tube is 2".

expert reply by: Kevin C

0

Answer 1

The overall length of the Replacement Topwind Handle w/ Claw Knob for etrailer and Ram Square, Direct Weld Jacks #TJD-7000-HD is 10-1/2 inches. The center to center length is 9 inches. I've attached a photo to assist.

view full answer...

Answer 2

You won't want to cut a jack like the Square Direct Weld Jack #TJD-8000, with the issue being that doing so you would cut the lift rod inside the jack, not to mention void the warranty, and compromise its capacity. So I would avoid doing that,…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

The B&W Continuum #BW78FR and the Reese Strait-Line #RP66083 are both great systems. The B&W Continuum is going to be easier to set up, but as far as sway control goes, I definitely have to give the edge to the Reese Strait-Line. The…

view full answer...

Answer 9

Hey Tony, thanks for writing in, and that's a really smart question. The answer is yes, the fresh water tank should be full when adjusting the 16,000 lb Equal-i-zer Weight Distribution System #EQ90-00-1600. What you want to do is have the trailer…

view full answer...

Answer 10

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 11

The best air bag kit for your 2020 Ford F-250 Super Duty with a single rear wheel are the Firestone Ride-Rite Air Helper Springs because they are the strongest, most durable air bags on the market to provide you with optimal support for your…

view full answer...

Answer 12

I attached a link on this page to the owners manual/install instructions for the Demco Hijacker Autoslide 13k hitch part #DM8550040 that you referenced for you to check out.

view full answer...