Recommended Uneven Rub Rail and J-Channel Trim for an Enclosed Trailer

Question

Question:

Hi, quick question I have a uneven trim like corner piece and I would like to know if you have it 1 inch and 11/16 wide And one side is is 1/4 And the other opposite side is 5/8 Thanks

asked by: Ricardo B

0

Expert Reply:

I'm not finding anything that's matching what you're looking for. Our only uneven trim we have is the Ueven Rub Rail Trim for Enclosed Trailer # 36283-955 which is 1 1/2" tall and 5/16" deep.

We also have the J-Channel Trim for Enclosed Trailer # 362416-955 which is 7/8" tall and is 1/4" deep. If you can send a picture of what you're looking for, I'd be happy to see if we have something.

expert reply by: Bryce D

0

Answer 1

I spoke to TRC and the gap/channel in the J-Channel Trim #362416-955 will measure 0.154" (diagram included). Though we have not done any installs with this as of yet, so no pictorial examples, there will be absolutely no issues with the…

view full answer...

Answer 2

There isn't really a right or wrong answer when it comes to selecting trim for the tops and sides of your trailer. It is really just about selecting the best shape/style/size that fits your contours the best. Trim like the Top Rail Trim for…

view full answer...

Answer 3

Yes, the Dexter E-Z Flex Equalizer #K71-655-00 will indeed work with the standard 1-3/4" wide double eye leaf springs.

view full answer...

Answer 4

We do offer a few of the 7-3/4" long equalizers with 3 9/16" holes. Unfortunately, the standard equalizers in this size like the #TREQE1 are not greaseable. There is the Dexter E-Z Flex Equalizer #K71-655-00 which is a 7-3/4" long…

view full answer...

Answer 5

I wasn't able to cross-reference these numbers but if you're looking for new bearings/races and seals all you need to do is note the capacity or measure. The easiest method would be to crawl under the trailer and look for the axle tag on the…

view full answer...

Answer 6

Some couplers have no lip, some have one that's a little rolled, and others have a flat lip, which is where the AMPLock Trailer Coupler Lock for Flat Lip 2-5/16" Ball Couplers #AMP74FR comes into play. I'm attaching a photo one of our…

view full answer...

Answer 7

The only 3-1/8" shackle kit we carry from Dexter is the #K71-358-00 which is for a single axle trailer. If you are in need of a complete kit for a tandem axle trailer, we recommend the MORryde Suspension Upgrade Kit #MR76ZR. This will come with…

view full answer...

Answer 8

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

view full answer...