What is the Best Wiring Harness for a 2018 Toyota Corolla iM?

Question

Question:

Im looking for a plug and play trailer wiring kit. No splicing in factory wires. Which option is best. 2018 Corolla IM. Thanks in advance for you help

asked by: Ken M

0

Expert Reply:

The best plug and play wiring harness for a 2018 Toyota Corolla iM is the Curt item # C56309. Curt makes some of the best and most reliable wiring harnesses in the towing business. Multiple manufactures use them as suppliers of their OEM towing harnesses.

The Curt item # C56309 has a custom-fit T-connector that plugs into your Corolla's wiring harness, which is located behind the tail lights. It will provide you with a 4-flat connector that will power your trailer or accessories lighting functions.

Listed below are some other parts you will need to tow a trailer with your 2018 Toyota Corolla iM:

Trailer Hitch - Draw-Tite item # 24952

Ball Mount - Draw-Tite Drawbar item # 3593

Hitch Balls - 2' item # 19258 or 1-7/8" item # 19256

expert reply by: Jerred H

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

Thanks for reaching out to verify, Frank! Yes, those parts (listed below) will fit great together and on your 2010 Honda Accord Crosstour with the naked roof. Inno Roof Rack - Aero Crossbars #INXB130-138 - Through Feet #INXS250 - Fit Kit #INK587 The…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes the Curt hitch part #C12130 is a confirmed fit for your 2008 Mercury Marquis. Then for trailer wiring the Curt harness part #C59236 would be a great option. It's a universal style harness that will require hardwiring to the taillight wiring.

view full answer...

What is the Best Wiring Harness for a 2018 Toyota Corolla iM?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching