How to Determine the Correct Hub Replacements for a Home Made Boat Trailer
Question:
i have a home built boat trailer , i need to replace the hubs. its a 5x4 1/2 bolt pattern 15in wheels the axel is 4 3/4inch from the seal lip. the seal dia.is 1 5/8inch the top bearing shoulder is 1 3/8dia. the bottom shoulder is 3/4dia. i need 4 hubs,with bearings,races,seals,and axel caps
asked by: Michael D
Helpful Expert Reply:
Hubs with a 5 on 4-1/2 inch bolt pattern are very common. In order to determine the correct replacement hubs I would need to know the inner and outer bearing numbers stamped into the metal of the bearings or I would need measurements of the spindle to the thousandth of an inch.
To get the most accurate measurement you would need to use dial or digital calipers. I have included a picture that shows the measurements needed and where to measure on the spindle.
The issue is that on hubs with 5 on 4-1/2 bolt pattern for 15 inch wheels there could be 1 of 3 possible inner bearings and 1 of 2 possible outer bearings. To get it right the first time the bearing numbers or precise measurements will be needed.
Also, do you need just idler hubs or hub and drum assemblies.
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU47FR
- Search Results: tru47fr
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Q&A: How to Determine the Correct Replacement Hub for an Old Jetski Trailer
- Shop: Trailer Wiring
- Search Results: ez connector
- Shop: EZ Connector Magnetic 7-Way Trailer Connector with 8' Long Cable - Watertight Seal - Trailer End
- Shop: EZ Connector Magnetic 7-Way Trailer Connector with 4' Long Cable - Watertight Seal - Trailer End
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Video: Choosing the Right Trailer Wiring
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Search Results: 44649
- Shop: Trailer Hitch
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 68149
- Q&A: Adding Brakes to a Mobile Home Axle
- Search Results: dust cap
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Shop: Gooseneck Hitch
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Article: How to Charge a Dump Trailer Battery
- Video: Review of Progressive Dynamics RV Inverters - 1,000 Watts Pure Sine Wave Inverter - PD34FR