Replacement Leaf Springs for Toy Hauler With 5,200 lb Lippert Axles  

Thanks for the picture of your build sheet! It does look like the etrailer 6-Leaf Double-Eye Spring item #e94SR you purchased is the correct replacement spring. Feel free to email me back a picture of your suspension but unless you are flipping your…

I did some digging around and found that the Dexter 072-099-01 is a double eye spring that is 26" and 1 3/4" wide with a 6k capacity. For a replacement you can use the 6-Leaf Double-Eye Spring for 6,000-lb Trailer Axles #e94SR. This leaf…

You are correct saying that the leaf spring can stretch a bit over time, and it sounds like that is exactly what happened; you need a 26" (eye to eye) double-eye leaf spring. I recommend going with the 6-Leaf Double-Eye Spring for 6,000-lb…

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

I can tell you how to determine the correct leaf spring replacement, though those numbers don't have anything to do with size. They are probably a serial number or some other type of manufacturer ID but nothing of consequence. Instead, the best…

Your best option would be to go with the 5,300 lb leaf springs as ideally you match the capacity exactly but if you can't then you'd go for next capacity higher. This ensures you aren't limiting the weight capacity of the trailer by the…

In order to choose the correct replacement leaf springs for a trailer you'll need to know the type (double eye/slipper), axle capacity, and unloaded length. The 6-Leaf Double-Eye Spring part #SP-222275 for example measures 24-7/8" long, has…

I definitely see what you're saying about the spacer, found as part #LC34UD, from the 2nd gen Correct Track LC407131. With that being said, the Correct Track Trailer Alignment and Lift Kit #RR23QX has been safety tested and works just fine…

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…