Will HappiJac Original Turnbuckles for Camper Tie-Downs Fit a 2016 Chevy Silverado 3500HD

Question

Question:

Will these fit 2016 Chevrolet 3500hd

asked by: Ted M

0

Expert Reply:

The HappiJac Original Turnbuckles for Camper Tie-Downs # LC182898 are a universal fitment so while they will technically fit your 2016 Chevy Silverado 3500HD, you'll want to compare their dimensions current setup to determine compatibility:

Front turnbuckles
- Minimum reach: 16-1/2"
- Maximum reach: 23-1/2"

Rear turnbuckles
- Minimum reach: 22-1/2"
- Maximum reach: 35-1/2"

If these dimensions fit with your setup then you'll be good to go!

expert reply by: Jon G

0

Answer 1

For your 2005 Dodge Ram 3500 dually with an 8 foot bed Happijac has their camper tie downs part #LC182908-182928 as a confirmed fit. Then for turnbuckles the HappiJac Original Turnbuckles part #LC182898 are a confirmed fit and would work great.

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 3

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 4

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 7

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Answer 8

The support braces in the HappiJac Truck-Mounted Camper Tie-Downs #LC182860 are going to attach to the cross frame to provide support for the anchors which will bolt through the bed wall and into the braces. The rear anchors will bolt through the…

view full answer...

Answer 9

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 12

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift P/N…

view full answer...

Will HappiJac Original Turnbuckles for Camper Tie-Downs Fit a 2016 Chevy Silverado 3500HD

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching