2007 Collin Arndt Replacement Latch Kit Recommendation for Door

Question

Question:

Look for a top cam keeper for a Collin Arndt 2007 Can find one no where. Here is a pic

asked by: Vickie R

0

Expert Reply:

While we don't have that style of door latch kit, I do have a solution for you with the Cam-Action Lockable Door Latch Kit # PLR258-002 which comes with everything but the bar which is looks like you already have.

I haven't seen that type of latch before so you may have trouble finding the top keeper which is why I referenced the kit above.

expert reply by: Jon G

0

Top Keeper on 2007 Collin Arndt Horse Trailer Door
(click to enlarge)

Answer 1

The Polar Heavy-Duty Cam Action Door Lock for Enclosed Trailers #PLR258-002 that you referenced will work well for you to add dual cam door locks to the dutch doors and ramp of your horse trailer. This cam action door lock can work for both right or…

view full answer...

Answer 2

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 3

To create barn doors out of your ramp door, you will need hinges and a latch. I suggest a latch/lock system like the Universal Cam-Door Lock for Enclosed Trailers - 1" Keeper, #383200. This will use a 3/4 inch diameter pipe that you'll have…

view full answer...

Answer 4

Instead of using the Hydraulic Brake Kit #AKFBBRK-35-D which requires using 14"-16" wheels you should use the Dexter Galphorite Free-Backing Hydraulic Trailer Brake Assembly Right #T4423400 and Left #T4423500. These will fit with your…

view full answer...

Answer 5

Yes, the Dexter E-Z Flex Equalizer #K71-655-00 will indeed work with the standard 1-3/4" wide double eye leaf springs.

view full answer...

Answer 6

We do offer a few of the 7-3/4" long equalizers with 3 9/16" holes. Unfortunately, the standard equalizers in this size like the #TREQE1 are not greaseable. There is the Dexter E-Z Flex Equalizer #K71-655-00 which is a 7-3/4" long…

view full answer...

Answer 7

The only 3-1/8" shackle kit we carry from Dexter is the #K71-358-00 which is for a single axle trailer. If you are in need of a complete kit for a tandem axle trailer, we recommend the MORryde Suspension Upgrade Kit #MR76ZR. This will come with…

view full answer...

Answer 8

I went out to our warehouse to take measurements of the Cam-Action Lockable Door Latch Kit for Large Enclosed Trailers - Zinc-Plated Steel #PLR258-002. The bar you will need is 3/4 inches inner diameter and can be up to 1-1/8 inches outer diameter to…

view full answer...

Answer 9

There are a few things that can cause your Dexter Electric Over Hydraulic Actuator #K71-651 to run none stop. The most likely reason is an issue with your break away switch. If the break away switch is faulty that would cause the actuator to think…

view full answer...

Answer 10

Yes, you have a couple of ways to test the Dexter DX Series Electric Over Hydraulic Brake Actuator #K71-651. The first test to try is to connect the white wire to the negative post of the battery. Then connect the black wire to the positive post on…

view full answer...

Answer 11

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...