Mounting Hole Dimensions for Replacement Master Cylinder for Dexter Aero 7500 Brake Actuators

Question

Question:

What are the bolt hole dimensions center to center for the Master cylinder, lengthwise and widthwise.

asked by: Douglasfournier

1

Helpful Expert Reply:

The mounting dimensions of the # T4714200042 are 1-5/8" wide x 3-5/8" tall (lengthwise) center to center.

expert reply by: Robin H

1

Answer 1

The overall dimensions of the #T4395100 are 2-1/8" wide x 7-1/8" long. If you count the top plate as part of the width it is 2-1/4" wide. The mounting dimensions are 1-5/8" wide x 3-5/8" tall.

view full answer...

Answer 2

The specs listed for the #KDBC225DAC Kodiak caliper I found online match up with those of the Reliable CL-1000. Either would be compatible with a 3500 to 6000 lb axle but because it hasn't been officially tested, If I were in your shoes I'd…

view full answer...

Answer 3

I've looked through the various replacement master cylinders we offer, and couldn't find anything that matches your photo. I found out that Reliable stopped manufacturing brake actuators several years ago, and replacement parts aren't…

view full answer...

Answer 4

You are correct that the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100 you were looking at is the replacement master cylinder for your older 23361. I included a video of the Titan #T4395100 for…

view full answer...

Answer 5

The Replacement Master Cylinder Assembly #T4395100 will not work to replace your Atwood master cylinder model 85841. Since replacement parts for your actuator are obsolete, your only option is to replace the entire actuator assembly. The Demco…

view full answer...

Answer 6

The DICO 189 you referenced is the older version of the Titan 60. You will want to replace the master cylinder with the Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators - Drum #T4395100. I've attached a video…

view full answer...

Answer 7

The Titan Surge Trailer Actuator part #T4747220 will pretty easily install in place of what you have now but looking at the picture of what you have and what looks like an equal distance between the mounting holes it would seem most likely that you…

view full answer...

Answer 8

According to my research, the Titan Aero 7500 and the 6000 Brake Actuating Couplers both use the same bolt pattern. To confirm this, you can compare the dimensions of the diagram I produced for you with the bolt holes on your trailer tongue.…

view full answer...

Answer 9

The best option we can offer would be a full replacement for the Titan Aero 7500 Brake Actuator. For this, I recommend the Dexter DX7.5 Drop-N-Go Brake Actuator part #099-175-20. There are indeed replacement parts for the old Titan Aero 7500 Brake…

view full answer...

Answer 10

Thanks for the pictures! It looks like you have a TCIC 23361 master cylinder. The Replacement Master Cylinder Assembly for Titan Model 60 and Aero 7500 Brake Actuators item #T4395100 is the replacement for it. However, this is a drum brake master…

view full answer...

Answer 11

Your surge coupler will have either a sticker or an engraving on it, typically near where the coupler is located. If you can get me that information and what you're needing to replace on it I'd be more than happy to help you find what…

view full answer...

Answer 12

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...