Recommended Ladder Rack for a 2024 Ford Maverick

Question

Question:

My 2024 Ford Maverick does not have a tonneau cover and I would like to add a ladder rack. Does this one work?

asked by: Chris R

0

Expert Reply:

No, that one doesn't but I have one that will. For your 2024 Ford Maverick you will want the Yakima OutPost HD Overland Truck Bed Rack item # Y01152-57. This ladder rack has a 500 lbs capacity and attaches to the inside of the bed using lockable clamps. The top of the uprights will sit 13" above your truck bed rails.

The Yakima OutPost HD Overland Truck Bed Rack w/ Tonneau Cover Adapter item # Y01152-5755 you were looking at does fit your truck but it attaches to a tonneau cover with t-slots like the RetraxONE XR Hard Tonneau Cover item # RTX83QR.

I have attached a couple of pictures below along with an installation video so you can see what this ladder rack looks like installed.

expert reply by: Jerred H

0

Yakima OutPost HD
(click to enlarge)

Answer 1

Yakima has a version of the Outpost HD that was designed for the tracks/slots of your RetraxONE tonneau with the part #Y01152-5755. This rack has the anchor points on the end of the crossbars like you mentioned as well.

view full answer...

Answer 2

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 3

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline…

view full answer...

Answer 4

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 5

I have a Yakima crossbar setup that is compatible with the Retrax Pro XR Tonneau Cover on your 2021 Toyota Tacoma, however, the Yakima Bedrock is not compatible and the 60" crossbars would be too short anyways. I recommend going with the…

view full answer...

Answer 6

The a-frame trailer jacks all use a standard mounting pattern and center hole size for the most part so although I am not quite sure what you are measuring I can confirm we have options, the Ultimate Trailer Jack part #322-RDJ-2K is a good one…

view full answer...

Answer 7

I can see why this might create some confusion; the Retrax ONE XR #RTT-60851 (5ft bed) or #RTT-60852 (6 ft bed) won't have a capacity since when using a rack it won't actually be bearing any real weight, but the roof rack you choose and the…

view full answer...

Answer 8

I have a better option for you to consider, but there isn't a way to use taller Rhino Rack feet with the rack you mentioned so you'd be best off with the Yakima OutPost HD part #Y01152-5855 which is a mid-height rack that fits the same Retrax…

view full answer...

Answer 9

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers are compatible with a Roll-N-Lock Tonneau Cover that have the MaxTrak System. The tracks are the same as the ones on other tonneau covers so there will be no…

view full answer...