Will Rhino-Rack Vortex Crossbars Work with Roll-N-Lock Tonneau Covers

Question

Question:

I have a 2020 GMC Canyon 52inch bed and a Roll-N-Lock Truck Hero Retractable tonneau cover. I have seen other websites say this rack is compatible with this system but I dont see it listed on etrailer as compatible. So...is this rack compatible? Are there other low profile racks compatible with the Roll-N-Lock that are available from trailer? The rack will need to carry a cargo box and 2 bike racks. Thanks.

asked by: Matt M

0

Expert Reply:

Yes, the Rhino-Rack Vortex Crossbars for Retrax XR and Mountain Top EVO-M Tonneau Covers are compatible with a Roll-N-Lock Tonneau Cover that have the MaxTrak System. The tracks are the same as the ones on other tonneau covers so there will be no compatibility issues. Please note, if you have a mid side truck like a Canyon you'll need part # RRVA165B-RRRLT600 or if you have a full size truck like a Sierra you'll need part # RRVA180B-RRRLT600.

expert reply by: Conner L

0

Answer 1

It looks like Terry is using a bike rack made by "1 UP USA" which we don't carry. That said, we do have a very similar style rack which fits the Rhino-Rack Roof Rack for Thule and Yakima Tracks part #Y01-140B-NT, it's the Inno Tire…

view full answer...

Answer 2

The legs of the Rhino-Rack Roof Rack for Thule and Yakima Tracks #Y01-140B-NT will fit the t-tracks of your Roll-N-Lock XT cover. We have had customers in the past use this in that fashion. The issues would come from the length of the crossbars. We…

view full answer...

Answer 3

The Rhino Rack Vortex Aero Crossbars like the part #RRVA150B-2 has pretty standard T-slot dimensions that you can see in the attached picture. Basically the top opening is 7/16 inch and in the slot itself measures 7/8 inch. Essentially all roof rack…

view full answer...

Answer 4

I recommend using the Rhino-Rack Vortex Crossbar System #RRVA180B-RRRLT600 on your 2020 Ford F-150. These crossbars are designed to mount to the T-Slot rails that come on your Roll N Lock tonneau cover. You can pair this with the Rhino-Rack T-Load…

view full answer...

Answer 5

For a set of crossbars and the feet that will attach them to your Retrax XR on your 2022 Ford F-350, you can use the Rhino-Rack Vortex Crossbar System for Retrax XR Series Tonneau Covers #RRVA180B-RRRLT600. According to Retrax, this will fit any of…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 8

I did see the review saying they used spacers, though that is the only time we have ever come across this, so I wouldn't say yes, spacers are going to be needed to use the Rhino-Rack system, which is the following part number: - Rhino-Rack Vortex…

view full answer...

Answer 9

The 71" Rhino-Rack Vortex Crossbars for Retrax XR Tonneau Covers item #RRVA180B-RRRLT600 are the correct set for your 2022 Ram 3500. These are made for full size trucks and fit in the rails of the Retrax PRO XR. These crossbars are exactly…

view full answer...

Answer 10

No, with the The Rhino-Rack Truck Bed Crossbar Kit #RR69QP you can only carry up to 110 pounds that is with both crossbars together. The bars are made out of a heavy-duty, aluminum that has a matte black finish and are lightweight and corrosion…

view full answer...

Answer 11

For a roof rack/crossbar setup that fits the tonneau cover channels you have on your truck the Rhino Rack Vortex Crossbar Setup part #RRVA180B-RRRLT600 that you referenced is what I would go with if I were you. This gives you a higher quality setup…

view full answer...

Answer 12

The difference between the Yakima Landing Pad 1 #Y00221 and Landing Pad 26 #Y75ZR are what they fit. The two come with different hardware and the Landing Pad 1 is mostly for some factory tracks as well as specific vehicles, while the Landing Pad 26…

view full answer...

Will Rhino-Rack Vortex Crossbars Work with Roll-N-Lock Tonneau Covers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching