Recommended Hitch Exntender With a 10K Weight Capacity

Question

Question:

Okay then do you have a six or eight inch hitch extension Thats rated for 10,000 pounds Towing and 1000 lb tongue weight?

asked by: Kelly B

0

Expert Reply:

The closest thing we have is the Roadmaster Anti-Rattle Hitch Extender for Tow Bars # RM-071-1075 which measures 7 3/4" long and has a 10,000 lb GTW, the only problem is this extender only has a 400 lb tongue weight capacity.

expert reply by: Bryce D

0

Answer 1

The Roadmaster Anti-Rattle Hitch Extender for Tow Bars - 2" Hitches - 7-3/4" #RM-071-1075 has a maximum tongue weight of 400 pounds. The tongue weight is the downward force that the trailer exerts on the hitch. If you are looking for the…

view full answer...

Answer 2

We can't recommend using more than one hitch extension. The added movement and leverage would put too much stress on the hitch. So if you needed a 12 inch hitch extension instead the Brophy extender part #3371804015 would work great.

view full answer...

Answer 3

I do have an option for you but a simple hitch extender won't do the trick due to both the stress of the weight distribution system as well as the weight of the trailer. Instead, you'll have to use a longer shank for the weight distribution…

view full answer...

Answer 4

I do have an option for you but in order to use crossbars with the Retrax XR Tonneau Cover on a full size truck you'll have to choose a crossbar length greater than 70". The Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600 is one of…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 8

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 9

We do have 205/75R14 size radial tires that have a load range of D and a speed rating of at least 81 mph. Out of our available selection I recommend going with the Kenda Karrier #AM10235. This tire has a max load rating of 2,200 lbs at 75 psi and a…

view full answer...

Answer 10

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 11

We do carry electric brake assemblies as well as hub/drum assemblies. To determine the correct fit, you will need to measure the spindles of your axles. I've attached a photo to assist with the measurement locations, and recommend using a digital…

view full answer...

Answer 12

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Recommended Hitch Exntender With a 10K Weight Capacity

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching